CPCI200DC Datasheet, PDF (1/4 Pages) C&D Technologies – 180/225 wATT, 3U x 4HP CompactPCI

CorporCatoer:pwowrawte.c:dwtewcwh.ncod.tceocmhno.com
Product: www.cdpoweronline.com
cPCI200DC
180/225 Watt, 3U x 4HP CompactPCI
z 3U X 4HP
z 36-72 VDC Input Range
z 180/225 Watt Continuous Output
Power
z Complies with PICMG 2.11 R1.0 with
47 Pin I/O Connector
z Hot-Swap Capable
z Outputs Individually Protected
Against Overloads; Automatic
Recovery
z PCI VoltageArchitecture
(5V, 3.3V,+12V,-12V)
z IPMI Capability (Available on Part
Numbers cPCI200D-3 and 4)
The cPCI200DC is a family of high-
reliability, 200 watt power supplies for
3U Compact PCI™ systems. Developed
to support hot-swap, redundant
operation, the cPCI200DC Series is
designed for compliance with PICMG™
2.11 R1.0 Power Interface Specification
with 47-pin I/O connector. Available with
IPMI functionality (part numbers
cPCI200D-3 and cPCI200D-4) , this unit
was developed with high-availability
SPECIFICATIONS, ALL MODELS
PARAMETER
Input Operating Voltage
Input Voltage Withstand
Inrush Current
Efficiency
SYMBOL
Vin
I_i
η
CONDITIONS
36VDC input
72VDC input
48VDC input, full load
MIN
36
34
(HA) telecommunications applications in
mind. Current sharing and internal ORing
diodes are included to support these and
other applications requiring reliable, hot-
swap performance and N+1 redundant
configuration. The 4HP package and
complement of agency approvals provide
for an advanced, high-density, high-
efficiency power solution for your
CompactPCI™ system requirements.
TYP
< 20
< 40
70
MAX
72
75
UNITS
VDC
VDC
APK
APK
%
OUTPUT NUMBER
VOUT
RATED OUTPUT VOLTAGE
IOUT
RATED OUTPUT CURRENTOUTPUT
Min
A*
B**
REGULATION
V1
V2
V3
V4
PARAMETER
Temperature Coefficient
PARD
+5.0VDC
+3.3VDC
+12.0VDC
-12.0VDC
SYMBOL
TC
CONDITIONS
20MHz bandwidth
all outputs
0A
18.0 A¹
0A
27.0 A
0A
4.0 A¹
0A
4.0 A¹
MIN
TYP
Output Power
Minimum Load
50°C max temp., 300lfm airflow
V1 (config A, 180W)
500
V2 (config B, 225W)
500
NOTES:
Outputs share common return.
* Total output power not to exceed 180W.
** Total output power not to exceed 225W.
1 Maximum combined power not to exceed 90 Watts.
27.0 A
+4 / -2%
27.0 A¹
4.0 A¹
+4 / -2%
+/-10%
4.0 A¹
+/-10%
MAX
UNITS
0.02
%/°C
50 mV_P-P
or 1.5% P-P
whichever is greater
180/225
W
mA
mA
cPCI200-DC REV A 7/2003