6P25-CA Datasheet, PDF (1/4 Pages) –

6-PAKs
SERIES PROGRAMMABLE DC/DC CONVERTER
POWER: 6 Amp
Parrallelable Boost Modules
SIZE: 2.00” x 0.60” x .27”
POWER ELECTRONICS DIVISION
www.cdtechno.com
click on Power Electronics
PRODUCT DATA SHEET
FEATURES
Small SIP Design
Parallelable Boost SIP
One stocking part meets a variety of loads
Programmable Control SIP
Control/Boost Pair extremely configurable
Fast Transient Response
No need for large external capacitors
Extremely small footprint
Low Component Count
Low cost, high reliability
Staked Pins
Wave solderable
Integrated Input Filter
Low input ripple
APPLICATION NOTE
DCAN-34 - 6-PAK Demo Board
Downloadable from our website -
cdpowerelectronics.com
DESCRIPTION
The 6-PAK™ is a modular system of control and boost
SIPs. Each 6A control SIP can also drive up to 8 additional
6A boost SIPs in parallel, for a total of 54A. Each SIP
accepts a regulated 5V input (+10%) and provides 2.5V to
3.6Vdc output. The circuit is optimized for high efficiency
and fast load transient response needed by telecom, DSP
and microprocessor applications.
Advanced thermal design, monolithic power circuitry and
synchronous rectification result in outstanding performance
and value. With integrated input filter and output capacitors,
the 6-PAK system makes a complete power supply which
requires no external components over the specified
operating range. Pins are staked for wave solderability.
Ordering Information
Typical examples:
6P 25 - CA 6A Control SIP
6P 25 - P 6A Power Booster SIP
6-PAK 8/2001 REV F
Page 1