2N5114_15 Datasheet, PDF (1/2 Pages) Calogic, LLC – P-Channel JFET Switch

P-Channel JFET Switch
LLC
2N5114 – 2N5116
GENERAL DESCRIPTION
Ideal for inverting switching or "Virtual Gnd" switching into
inverting input of Op. Amp. No driver is required and ±10VAC
signals can be handled using only +5V logic (TTL or CMOS).
FEATURES
Low ON Resistance
• _{ID(off)<500pA}
•• _{Switches directly from TTL Logic}
PIN CONFIGURATION
TO-18
ABSOLUTE MAXIMUM RATINGS
(TA = 25^oC unless otherwise noted)
Gate-Drain or Gate-Source Voltage . . . . . . . . . . . . . . . . . 30V
Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Storage Temperature Range . . . . . . . . . . . . . -65^oC to +200^oC
Operating Temperature Range . . . . . . . . . . . -55^oC to +200^oC
Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . +300^oC
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Derate above 25^oC . . . . . . . . . . . . . . . . . . . . . . . . 3mW/^oC
NOTE: Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or
any other conditions above those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
Part
Package
Temperature Range
2N5114-16 Hermetic TO-18
-55^oC to +200^oC
X2N5114-16 Sorted Chips in Carriers -55^oC to +200^oC
5508
D
G,C
S
SWITCHING CHARACTERISTICS (TA = 25^oC unless otherwise specified)
SYMBOL
PARAMETER
td
Turn-ON Delay Time
2N5114
MAX
6
2N5115
MAX
10
tr
Rise Time (Note 2)
10
20
toff
Turn-OFF Delay Time (Note 2)
6
8
tf
Fall Time (Note 2)
15
30
2N5116
MAX
12
30
10
50
UNITS
ns
ELECTRICAL CHARACTERISTICS (TA = 25^oC unless otherwise specified)
SYMBOL
PARAMETER
BVGSS
Gate-Source Breakdown Voltage
2N5114
MIN MAX
30
2N5115
MIN MAX
30
IGSS
Gate Reverse Current
500
500
1.0
1.0
-500
-500
ID(off)
Drain Cutoff Current
-1.0
-1.0
VP
Gate-Source Pinch-Off Voltage
5
10
3
6
2N5116
MIN MAX
30
500
1.0
-500
-1.0
1
4
UNITS TEST CONDITIONS
V IG = 1µA, VDS = 0
pA VGS = 20V, VDS = 0
µA
TA 150^oC
pA VDS = -15V
VGS = 12V (2N5114)
µA ^{VGS = 7V (2N5115)}
VGS = 5V (2N5116)
V VDS = -15V, ID = -1nA
CALOGIC LLC, 237 WHITNEY PLACE, FREMONT, CA 94539, 510-656-2900 PHONE, 510-651-1076 FAX
DS0078 REV A