PACDN042 Datasheet, PDF (4/14 Pages) California Micro Devices Corp – Transient Voltage Suppressors / ESD Protectors

PACDN042/43/44/45/46
Specifications (cont’d)
ELECTRICAL OPERATING CHARACTERISTICS
SYMBOL PARAMETER
CONDITIONS
MIN TYP MAX UNITS
C Capacitance
V_RSO Reverse Stand-off Voltage
T_A = 25°C, 2.5VDC, 1MHz
30
pF
I_R=10µA, T_A = 25°C
5.5
V
I_R=1mA, T_A = 25°C
6.1
V
I_LEAK Leakage Current
V_IN=5.0VDC, T_A = 25°C
1
100
nA
V_SIG
Small Signal Clamp Voltage
Positive Clamp
Negative Clamp
I = 10mA, T_A = 25°C
I = -10mA, T_A = 25°C
6.2
6.8
8
V
-0.4 -0.8 -1.2
V
V_ESD
ESD Withstand Voltage
Human Body Model, MIL-STD-883,
Method 3015
Contact Discharge per IEC 61000-4-2
standard
Notes 1 & 2
Notes 1 & 2
+30
kV
+20
kV
V_CL Clamping Voltage during ESD Discharge MIL-STD-883D, Method 3015
+8kV Discharge
-8kV Discharge
12
V
-8
V
R_D Diode Dynamic Resistance
Forward Conduction
Reverse Conduction
1.0
Ω
1.4
Ω
Note 1: Guaranteed by design and characterization.
Note 2: ESD voltage applied between channel pins & ground, one pin at a time; all other channel pins open; all GND pins grounded.
© 2003 California Micro Devices Corp. All rights reserved.
4 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 L Tel: [phone]
L Fax: [phone] L www.calmicro.com
11/26/03