CM1460 Datasheet, PDF (3/7 Pages) California Micro Devices Corp – Praetorian™ L-C LCD and Camera EMI Filter Array with ESD Protection

Specifications
PARAMETER
Storage Temperature Range
Current per Inductor
DC Package Power Rating
ABSOLUTE MAXIMUM RATINGS
RATING
-65 to +150
30
500
PARAMETER
Operating Temperature Range
STANDARD OPERATING CONDITIONS
RATING
-40 to +85
CM1460
UNITS
°C
mA
mW
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE1)}
SYMBOL
L
C_TOTAL
PARAMETER
Channel Inductance
Total Channel Capacitance
C
Capacitance C1
V_DIODE
I_LEAK
V_SIG
V_ESD
R_DYN
f_C
Standoff Voltage
Diode Leakage Current (reverse bias)
Signal Clamp Voltage
Positive Clamp
Negative Clamp
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883, Method
3015
b) Contact Discharge per IEC 61000-4-2 Level 4
Dynamic Resistance
Positive
Negative
Roll-off Frequency at 06dB Attenuation
Z_SOURCE=50Ω, Z_LOAD=50Ω
CONDITIONS
MIN
At 2.5VDC Reverse
24
Bias, 1MHz, 30mVAC
At 2.5VDC Reverse
12
Bias, 1MHz, 30mVAC
I_DIODE=10μA
V_DIODE=+3.3V
TYP
17
30
15
6.0
0.1
MAX
36
18
1.0
UNITS
nH
pF
pF
V
μA
I_LOAD = 10mA
I_LOAD = -10mA
Notes 2, 3and 4
5.6 6.8 9.0
V
-1.5 -0.8 -0.4
V
±30
kV
±15
kV
2.3
Ω
0.9
Ω
350
MHz
Note 1: T_A=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then
clamping voltage is measured at pin C1). Unused pins are left open.
Note 4: These parameters are guaranteed by design and characterization.
© 2006 California Micro Devices Corp. All rights reserved.
02/23/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: [phone] ● Fax: [phone] ● www.cmd.com 3