CM1431 Datasheet, PDF (3/9 Pages) California Micro Devices Corp – LCD and Camera EMI Filter Array with ESD Protection

Specifications
PARAMETER
Storage Temperature Range
DC Power per Resistor
DC Package Power Rating
ABSOLUTE MAXIMUM RATINGS
RATING
-65 to +150
100
500
PARAMETER
Operating Temperature Range
STANDARD OPERATING CONDITIONS
RATING
-40 to +85
CM1431
UNITS
°C
mW
mW
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE1)}
SYMBOL
R
C_TOTAL
C
V_DIODE
I_LEAK
V_SIG
V_ESD
R_DYN
f_C
A_1GHz
A_{800MHz -}
6GHz
PARAMETER
Resistance
Total Channel Capacitance
Capacitance C
Standoff Voltage
Diode Leakage Current (reverse bias)
Signal Clamp Voltage
Positive Clamp
Negative Clamp
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
b) Contact Discharge per IEC 61000-4-
2 Level 4
Dynamic Resistance
Positive
Negative
Cut-off Frequency
Z_SOURCE=50Ω, Z_LOAD=50Ω
Absolute Attenuation @ 1GHz from 0dB
Level
Absolute Attenuation @ 800MHz to
6GHz from 0dB Level
CONDITIONS
At 2.5VDC Reverse Bias, 1MHz,
30mVAC
At 2.5VDC Reverse Bias, 1MHz,
30mVAC
I_DIODE=10μA
V_DIODE=+3.3V
I_LOAD = 10mA
I_LOAD = -10mA
Notes 2 and 3
Channel R = 100Ω,
Channel C = 15pF
Z_SOURCE = 50Ω, Z _LOAD = 50Ω,
DC Bias = 0V; Notes 1, 4 and 5
Z_SOURCE = 50Ω, Z _LOAD = 50Ω,
DC Bias = 0V; Notes 1, 4 and 5
MIN TYP
80 100
24 30
12 15
6.0
0.1
5.6 6.8
-1.5 -0.8
±30
±15
2.3
0.9
110
35
30
MAX
120
36
18
1.0
9.0
-0.4
Note 1: T_A=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: These parameters are guaranteed by design and characterization.
Note 4: Attenuation / RF curves characterized by a network analyzer using microprobes.
Note 5: These parameters are NOT guaranteed by design, characterization and production.
UNITS
Ω
pF
pF
V
μA
V
V
kV
kV
Ω
Ω
MHz
dB
dB
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: [phone] ● Fax: [phone] ● www.cmd.com 3