CM1411 Datasheet, PDF (3/6 Pages) California Micro Devices Corp – 2 Channel Headset/Speaker EMI Filter with ESD Protection

Specifications
PARAMETER
Storage Temperature Range
DC Power per Resistor
DC Package Power Rating
CM1411
ABSOLUTE MAXIMUM RATINGS
RATING
-65 to +150
100
200
UNITS
°C
mW
mW
PARAMETER
Operating Temperature Range
STANDARD OPERATING CONDITIONS
RATING
-40 to +85
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE 1)}
SYMBOL PARAMETER
R
Resistance
CONDITIONS
MIN TYP
9
10
MAX
11
UNITS
Ω
C
Capacitance
80 100
120
pF
I_LEAK
V_SIG
V_ESD
V_CL
f_C
Diode Leakage Current
Signal Voltage
Positive Clamp
Negative Clamp
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
b) Contact Discharge per IEC 61000-4-2
Level 4
Clamping Voltage during ESD Discharge
MIL-STD-883 (Method 3015), 8kV
Positive Transients
Negative Transients
Cut-off frequency
Z_SOURCE = 50Ω, Z_LOAD = 50Ω
V_IN=5.0V
I_LOAD = 10mA
Notes 2,4 and 5
Notes 2,3,4 and 5
R = 10Ω, C = 100pF
1.0
μA
5
7
15
V
-5 -10
-15
V
±15
kV
±8
kV
+15
V
-19
V
31
MHz
Note 1: T_A=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1,
then clamping voltage is measured at Pin C1.
Note 4: Unused pins are left open
Note 5: These parameters are guaranteed by design and characterization.
© 2005 California Micro Devices Corp. All rights reserved.
09/15/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: [phone] ● Fax: [phone] ● www.calmicro.com 3