CM1214A Datasheet, PDF (3/9 Pages) California Micro Devices Corp – 1 and 2 Channel PicoGuardTM AC Signal ESD Protector

CM1214A
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
DC Voltage between CH pins
Operating Temperature Range
Storage Temperature Range
Package Power Rating
SOT23-3 Package (CM1214A-01SO)
MSOP8 Package (CM1214A-02MR)
RATING
7
–40 to +85
–65 to +150
225
400
UNITS
V
°C
°C
mW
mW
PARAMETER
Operating Temperature Range
STANDARD OPERATING CONDITIONS
RATING
–40 to +85
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE 1)}
SYMBOL PARAMETER
CONDITIONS
MIN
V_ST Standoff Voltage
I=10μA
V_ESD ESD Voltage Protection
Notes 2, 3 and 4
Peak discharge voltage between
CH pins
a) Contact discharge per
±8
IEC 61000-4-2 standard
I_LEAK Channel Leakage Current
T_A=25°C, 5.5V between CH pins
R_DYN Dynamic Resistance
T_A=25°C, I_PP = 1A, t_P = 8/20μS; Any
I/O pin to Ground; Notes 2 and 5
V_CL Channel Clamp Voltage
T_A=25°C, I_PP = 1A, t_P = 8/20μS;
Notes 2 & 5
C_IN Channel Input Capacitance
Measured at 1MHz between CH
Voltage between CH pins = 0V pins; Note 2 applies
0.4
Voltage between CH pins = 5V
0.35
TYP
±7
±0.1
1.36
11.3
0.6
0.54
MAX
±1.0
0.9
0.8
UNITS
V
kV
μA
Ω
V
pF
pF
Note 1: All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
Note 2: These parameters guaranteed by design and characterization.
Note 3: Standard IEC 61000-4-2 with C_Discharge = 150pF, R_Discharge = 330Ω,.
Note 4: From CH pin with other CH pin grounded.
Note 5: No Connect pins are left open for all tests.
© 2007 California Micro Devices Corp. All rights reserved.
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: [phone] ● Fax: [phone] ● www.cmd.com
3
Issue A – 10/29/07