CM1213A Datasheet, PDF (3/11 Pages) California Micro Devices Corp – 1-, 2- and 4-Channel Low Capacitance ESD Protection Arrays

CM1213A
Specifications
PARAMETER
Operating Supply Voltage (V_P - V_N)
Operating Temperature Range
Storage Temperature Range
DC Voltage at any channel input
ABSOLUTE MAXIMUM RATINGS
RATING
6.0
–40 to +85
–65 to +150
(V_N - 0.5) to (V_P + 0.5)
UNITS
V
°C
°C
V
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
Package Power Rating
SOT23-3, SOT143-4,SOT23-5 and SOT23-6 Packages
MSOP-10 Package
RATING
–40 to +85
225
400
UNITS
°C
mW
mW
ELECTRICAL OPERATING CHARACTERISTICS^{(SEE NOTE 1)}
SYMBOL
V_P
I_P
V_F
I_LEAK
C_IN
PARAMETER
Operating Supply Voltage (V_P-V_N)
Operating Supply Current
Diode Forward Voltage
Top Diode
Bottom Diode
Channel Leakage Current
Channel Input Capacitance
ΔC_IN ^{Channel Input Capacitance Matching}
C_MUTUAL Mutual Capacitance between signal pin and
adjacent signal pin
V_ESD
ESD Protection - Peak Discharge Voltage at
any channel input, in system
a) Contact discharge per
IEC 61000-4-2 standard
b) Human Body Model, MIL-STD-883,
Method 3015
V_CL Channel Clamp Voltage
Positive Transients
Negative Transients
CONDITIONS
(V_P-V_N)=3.3V
I_F = 8mA; T_A=25°C
T_A=25°C; V_P=5V, V_N=0V
At 1 MHz, V_P=3.3V, V_N=0V,
V_IN=1.65V; Note 2 applies
At 1 MHz, V_P=3.3V, V_N=0V,
V_IN=1.65V; Note 2 applies
At 1 MHz, V_P=3.3V, V_N=0V,
V_IN=1.65V; Note 2 applies
Notes 2, 4 & 5; T_A=25°C
Notes 2, 3 & 5; T_A=25°C
T_A=25°C, I_PP = 1A,
t_P = 8/20μS; Notes 2, & 5
MIN TYP MAX UNITS
3.3 5.5
V
8.0
μA
0.60 0.80 0.95
V
0.60 0.80 0.95
V
±0.1 ±1.0 μA
0.85 1.2
pF
0.02
pF
0.11
pF
±8
kV
±15
kV
+9.96
V
–1.6
V
R_DYN
Dynamic Resistance
Positive Transients
Negative Transients
I_PP = 1A, t_P = 8/20μS
Any I/O pin to Ground; Note 2
0.96
Ω
and 5
0.5
Ω
Note 1: All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
Note 2: These parameters guaranteed by design and characterization.
Note 3: Human Body Model per MIL-STD-883, Method 3015, C_Discharge = 100pF, R_Discharge = 1.5KΩ, V_P = 3.3V, V_N grounded.
Note 4: Standard IEC 61000-4-2 with C_Discharge = 150pF, R_Discharge = 330Ω, V_P = 3.3V, V_N grounded.
Note 5: These measurements performed with no external capacitor on V_P (V_P floating).
© 2007 California Micro Devices Corp. All rights reserved.
04/03/07
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 lTel: [phone] lFax: [phone] lwww.cmd.com
3