PRN146 Datasheet, PDF (1/1 Pages) California Micro Devices Corp – ZERO OHMJUMPER ARRAY

CALIFORNIA MICRO DEVICES
PRN 146/147
ZERO OHM JUMPER ARRAY
Features
• Stable low resistance circuit interconnect
• 10 or 12 jumpers/package
• Saves board space and reduces assembly cost
• Industry standard SOIC and
QSOP (SSOP) packages
Applications
• Circuit Interconnect
• Crossovers on PC Boards
Product Description
CMD’s PRN146/147 Zero Ohm Networks in a miniature QSOP or SOIC package^†, save critical board area and provide
manufacturing cost and reliability efficiencies.
Why zero ohm networks? Jumpers (or crossovers) are used as interconnects between points on a PC board. They are
typically used to connect two points to alter the circuit functionality. This provides circuit flexibility and simplicity after
board design. They may also be used as crossovers on the PC board when the layout may not permit this.
STANDARD SPECIFICATIONS
Resistance (R)
Operating Temperature Range
Power Rating/Jumper
Minimum Insulation Resistance
Storage Temperature
Package Power Rating
0.3 Ohms (typical)
0^OC to 70°C
250mW
10,000 Meg Ω
-65^OC to +150^OC
1.00W, max.
SCHEMATIC CONFIGURATION
STANDARD PART ORDERING INFORMATION
Ordering Part Number
Pins
Package
Tubes
Tape & Reel
Part Marking
24
Wide SOIC
24
QSOP
20
Wide SOIC
20
QSOP
PRN146-S/T
PRN146-Q/T
PRN147-S/T
PRN147-Q/T
PRN146-S/R
PRN146-Q/R
PRN147-S/R
PRN147-Q/R
PRN146-S
PRN146-Q
PRN147-S
PRN147-Q
©1998 California Micro Devices Corp. All rights reserved.
P/Active^® is a registered trademark and PAC is a trademark of California Micro Devices.
C^C01²⁰⁵⁹9⁷7^DD
77// 987
215 Top2a1z5StTroeepta, zMSiltpreiteats,, MCailipfoitransia, C9a5l0if3o5rnia 9T5el0: 3(4508) 2T6e3l-:32(41048) 26F3ax-3: 2(41048) 26F3a-7x8:4(6408) 2w6w3w-.7c8al4m6icro.com
1