PRN105 Datasheet, PDF (1/2 Pages) California Micro Devices Corp – SOT23 Thin Film Precision Voltage Divider Network

PRN105
SOT23 Thin Film Precision Voltage Divider Network
Features
• Wide resistance range (10 to 1MΩ)
• Tolerance ±0.1%, ratios ±0.05%
• Low temperature coefficient ±25ppm/°C
• Low tracking temperature coefficient
of resistance ±5ppm/°C
• Long term stability, 0.05% after 1000 hours
• Also available in custom values
and configuration
Applications
• Precision voltage dividers
• OP AMP gain control
• Attenuation
• Pull-up/pull-down
• TTL/MOS interfacing
Product Description
California Micro Devices’ PRN105 precision voltage
divider resistor array offers a high degree of stability, low
noise and the proven reliability characteristics of Tanta-
lum Nitride. These devices are manufactured using
advanced Thin Film Technology. A wide range of resistor
values is available, as well as various tolerances and
TCRs.
Electrical
Standard Resistance Range
(R1 + R2)
Operating Temperature Range
VCR
Maximum Power Rating
for Each Resistor
Minimum Insulation Resistance
Noise, MAX
(MIL-STD-202, Method 308)
Minimum Operating Voltage
10 to 1MΩ
–55_˚C to 150_˚C
5ppm/V
125mW
100MΩ
–25dB
100V or P x R
Tolerances
˚ ^{Absolute Resistance @ 25 C, % ±0.1, ±0.2, ±0.5, ±1, ±2, ±5}
Ratio, %
±0.05, ±0.1, ±0.2, ±0.5, ±1
Temperature Coefficient
of Resistance, ppm/˚C
±25, ±50, ±100,
Typical Tracking (TCR), ppm/_˚C ±5, ±10
Lead Plating
Lead Material
Lead Coplanarity
Substrate Material
Resistor Material
Body Material
Flammability
Mechanical
Tin-Lead
Copper Alloy
0.004” (0.102mm)
Silicon
Tantalum Nitride
Molded Epoxy
UL94V-0
Power Dissipation
0.25W @ 70_˚C
Standard Network Schematic Diagram
3
R1
R2
© 2001 California Micro Devices Corp. All rights reserved.
215 Topaz Street, Milpitas, California 95035 
5/22/2001
1
2
Tel: [phone]
Fax: [phone]
C1621200
www.calmicro.com
1