PAC27A88 Datasheet, PDF (1/2 Pages) California Micro Devices Corp – P/ACTIVE OCTAL RELAY DRIVER

CALIFORNIA MICRO DEVICES
PAC27A88
P/ACTIVE OCTAL RELAY DRIVER
Features
• Octal relay driver for up to 40mA of sink current
• Open drain outputs with diodes for inductive
load protection
• Less than 10µA of standby current
• 5 KV ESD protection
Pin Assignments
1
INP(1)
2
INP(2)
3
INP(3)
4
INP(4)
5
VDDin
6
GND
7
INP(5)
8
INP(6)
9
INP(7)
10
INP(8)
OP(1)
20
OP(2)
19
OP(3)
18
OP(4)
17
VDDout
16
GND
15
OP(5)
14
OP(6)
13
OP(7)
12
OP(8)
11
Product Description
PAC27A88
CAMD’s P/Active 27A88 is an 8 channel, open drain driver with low ON resistance and integrated protection diodes for
inductive load switching. Each output can sink 40mA and all outputs may be active simultaneously. The circuit has two
VDD connections for separation of the logic (VDD_IN) and load (VDD_OUT) supplies. A logic high on an input causes the
corresponding output driver to turn ON and sink current from the load. A logic low on an input causes the corresponding
output driver to turn OFF. When the switching inductive loads, the output protection diodes clamp the outputs to VDD_OUT
All inputs have pull downs to insure that the outputs are OFF when the inputs are open circuited. The inputs are fully
compatible with CMOS logic and allow the PAC27A88 to be driven directly from microcontrollers and ASICs. CAMD’s
PAC27A88 is available in 20-pin small outline packages for space saving and manufacturing efficiency.
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Supply voltage
VDDout
Input clamp voltage
VDDin
Voltage at any output
Vout
Voltage at any input
Vin
Sink current into any output (ON or OFF)
Iout
Current into any input
Iin
Operating Temperature Range
TA
Storage Temperature
Tstg
Package Power Rating
Rating
-0.5V to 7V
-0.5V to 12V
-0.5V to VDDout 0.8V
-0.5V to VDDin 0.5V
80mA
10mA
-40^oC to 70^oC
-65^oC to 150^o
1.00W, max.
The absolute maximum ratings are limiting values, to be applied individually, beyond which the device may be permanently
damaged. Functional operation under any of these conditions is not guaranteed. Exposing the device to its absolute
maximum rating may affect its reliability.
RECOMMENDED OPERATING CONDITIONS (-40°C TP 70°C)
Parameter
Symbol
Rating
Supply voltage
VDDout
5V
Input clamp voltage
VDDin
5V
ELECTRICAL CHARACTERISTICS
Parameter
Condition
Driver output voltage Low
Vin = VDD, Iout = 40mA
Driver output voltage High
Vin = 0, Iout = 40mA
Driver output leakage current
Vin = 0, Vout = VDD
Driver input low voltage
Driver input high voltage
Driver input current
Vin =5V
(TA = 25°C, VDD = 5V±10%)
Min
Typ
Max
150mV
300mV
VDD + 1.1V
1µA
0
0.3V
VDD - 0.3V
VDD
40µΑ
© 2000 California Micro Devices Corp. All rights reserved.
4/00
215 Topaz Street, Milpitas, California 95035
Tel: [phone]
Fax: [phone]
www.calmicro.com
C0830400
1