English
Language : 

NDC Datasheet, PDF (1/1 Pages) California Micro Devices Corp – ISOLATED RESISTOR NETWORK
CALIFORNIA MICRO DEVICES
NDC
ISOLATED RESISTOR NETWORK
California Micro Devices’ resistor arrays are the hybrid equivalent to the isolated resistor networks available in surface
mount packages. The resistors are spaced on ten mil centers resulting in reduced real estate. These chips are
manufactured using advanced thin film processing techniques and are 100% electrically tested and visually inspected.
ELECTRICAL SPECIFICATIONS
Parameter
Test Condition
TCR
-55°C to +125°
±100ppm/°C
Max
Operating Voltage
-55°C to +125°
50Vdc
Max
Power Rating (per resistor)
@ 70°C (Derate linearly to zero @ 150°C) 50mw
Max
Thermal Shock
Method 107 MIL-STD-202F
±0.25%@∆R
Max
High Temperature Exposure
100 Hrs @ 150°C Ambient
±0.25%∆R
Max
Moisture Resistance
Method 106 MIL-STD-202F
±0.5%∆R
Max
Life
Method 108 MIL-STD-202F (125°C/1000hr) ±0.5%∆R
Max
Noise
Method 308 MIL-STD-202F
-35 dB
Max
≥250kΩ
-30 dB
Max
Short Time Overload
MIL-R-83401
0.25%
Max
Insulation Resistance
@25°C
1 X 1012Ω
Min
90
R1 R2 R3 R4 R5 R6 R7 R8
60
Formats
Die Size: 90±3 x 60±3 mils
Bonding Pads: 5x7 mils typical
VALUES
8 resistors from 100Ω to 346Ω
MECHANICAL SPECIFICATIONS
Substrate
Silicon 10±2 mils thick
Isolation Layer
SiO2 10,000Å thick, min
Backing
Lapped (gold optional)
Metalization
Aluminum 10,000Å thick, min
(15,000Å gold optional)
Passivation
Silicon nitride
PACKAGING
Two inch square trays of 196 chips maximum.
NOTES
1. Resistor pattern may vary from one value to another.
CC
Series
5003
Value
First 3 digits
are
significant
value. Last
digit
represents
number of
zeroes. R
indicates
decimal point.
PART NUMBER DESIGNATION N
F
A
G
W
Tolerance TCR
Bond Pads
Backing
D = ±0.5% No Letter =±100ppm G = Gold
W = Gold
F = ±1% A = ±50%
No Letter=Aluminum L = Lapped
G = ±2% B = ±25%
No Letter=Either
J = ±5%
K = ±10%
M = ±20%
P
Ratio Tolerance
No Letter=±1%
P = ±0.5%
© 2000 California Micro Devices Corp. All rights reserved.
4/00
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com
C0820400
1