CM1409 Datasheet, PDF (1/7 Pages) California Micro Devices Corp – LCD and Camera EMI Filter Array with ESD Protection

PRELIMINARY
CM1409
LCD and Camera EMI Filter Array with ESD Protection
Features
• Six and eight channels of EMI filtering with inte-
grated ESD protection
• Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
• ±15kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
• ±30kV ESD protection on each channel (HBM)
• Greater than 35dB attenuation (typical) at 1 GHz
• TDFN package with 0.50mm lead pitch:
• 6-ch. = 12-lead TDFN
• 8-ch. = 16-lead TDFN
• Tiny TDFN package size:
• 12-lead: 3.0mm x 1.35mm (two styles)
• 16-lead: 4.0mm x 1.60mm
• Increased robustness against vertical impacts
during manufacturing process
• Lead-free finishing
Applications
• LCD and Camera data lines in mobile handsets
• I/O port protection for mobile handsets, notebook
computers, PDAs etc.
• EMI filtering for data ports in cell phones, PDAs or
notebook computers.
• Wireless handsets
• Handheld PCs/PDAs
• LCD and camera modules
Product Description
The CM1409 is a family of pi-style EMI filter arrays with
ESD protection, which integrates six and eight filters
(C-R-C) in small form factor TDFN 0.50mm pitch pack-
ages. The CM1409 has component values of 15pF-
100Ω-15pF per channel. The CM1409 has a cut-off fre-
quency of 110MHz and can be used in applications
with data rates up to 44Mbps. The parts include ESD
diodes on every pin, which provide a very high level of
protection for sensitive electronic components that may
be subjected to electrostatic discharge (ESD). The
ESD protection diodes safely dissipate ESD strikes of
±15kV, well beyond the maximum requirement of the
IEC61000-4-2 international standard. Using the MIL-
STD-883 (Method 3015) specification for Human Body
Model (HBM) ESD, the pins are protected for contact
discharges at greater than ±30kV.
These devices are particularly well-suited for portable
electronics (e.g. wireless handsets, PDAs, notebook
computers) because of their small package and easy-
to-use pin assignments. In particular, the CM1409 is
ideal for EMI filtering and protecting data and control
lines for the I/O data ports, LCD display and camera
interface in mobile handsets.
The CM1409 is housed in space-saving, low-profile 12-
and 16-lead TDFN packages with a 0.50mm pitch and
is available with lead-free finishing.
Electrical Schematic
FILTER+ESDn*
GND
100Ω
15pF ^R
C
15pF
C
FILTER+ESDn*
* See Package/Pinout Diagram
for expanded pin information.
1 of 6 or 8 EMI/RFI + ESD Channels
© 2006 California Micro Devices Corp. All rights reserved.
06/16/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: [phone] ● Fax: [phone] ● www.cmd.com
1