SVG-10A483AAT Datasheet, PDF (1/1 Pages) Caliber Electronics Inc. – 14 Pin and 6 Pin / SMD / HCMOS / VCXO Oscillator

CALIBER
Electronics Inc.
Lead-Free
RoHS Compliant
SV Series
14 Pin and 6 Pin / SMD / HCMOS / VCXO Oscillator
PART NUMBERING GUIDE
Environmental/Mechanical Specifications on page F5
SV G - 25 C 27 3 A B T - 40.000MHz - A
5X7X1.7mm Max.
G=4 Pad, H=6Pad (“A” pin conf. option avail.)
Frequency Stability
100 = +/-100ppm, 50 = +/-50ppm,
25 = +/-25ppm, 15 = +/-15ppm, 10 = +/- 10ppm
Frequency Pullability
A = +/-10ppm, B = +/-30ppm, C = +/-50ppm
D = +/-100ppm, E = +/- 150ppm
Operating Temperature Range
Blank= 0°C to 70°C, 48 = -40°C to 85°C
Pin Configuration
A= Pin 2 NC / Pin 5 Tristate
Tristate Option
Blank = No Connect, T = Trisate
Linearity
A = 20%, B = 15%, C = 10%, D = 5%
Duty Cycle
Blank = 40-60%, A= 45-55%
Input Voltage
Blank = 5.0V, 3=3.3V
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Aging (at 25°C)
Load Drive Capability
Start Up Time
Linearity
Input Current
Pin 2 Tri-State Input Voltage
or
Pin 5 Tri-State Input Voltage
Pin 1 Control Voltage / Frequency Deviation
One Sigma Clock Jitter
Absolute Clock Jitter
Frequency Tolerance / Stability
Output Voltage Logic High (Voh)
Output Voltage Logic Low (Vol)
Rise Time / Fall Time
Duty Cycle
Frequency Deviation Over Control Voltage
MECHANICAL DIMENSIONS
5.0 Max
Metal
7.5 Max
1.0 ±0.2 ₄
(X4 plcs.)
3
Ceramic
1.6
±0.2
2.20
±0.15
2.000MHz to 20.000MHz
20.001MHz to 40.000MHz
40.001MHz to 60.000MHz
Revision: 2002-B
2.000MHz to 60.000MHz
0°C to 70°C / -40°C to 85°C
-55°C to 100°C
5.0Vdc ±5% or 3.3Vdc ±5%
±3ppm / year Maximum
15pF HCMOS Load
10mSeconds Maximum
±20%, ±15%, ±10%, ±5% Maximum
10mA Maximum
20mA Maximum
30mA Maximum
10mA Maximum (3.3V)
15mA Maximum (3.3V)
20mA Maximum (3.3V)
No Connection
VIH: >2.0Vdc
VIL: <0.8Vdc
Enables Output
Enables Output
Disables Output: High Impedance
2.5Vdc ±2.0Vdc
2.5Vdc ±2.5Vdc
1.65Vdc ±1.65Vdc (or ±1.5Vdc
±10, ±, 30, ±50, ±100ppm Minimum
±10, ±, 30, ±50, ±100, ±150ppm Minimum
±10, ±, 30, ±50, ±100, ±150ppm Minimum
<60.000MHz
±10pSeconds Maximum
<60.000MHz
±100pSeconds Maximum
Inclusive of Operating Temperature Range, Supply
Voltage and Load
±50ppm, ±30ppm, ±20ppm (-10°C to 70°C max.),
±15ppm (-10°C to 70°C max.), ±10ppm (-10°C to 60° max.)
w/HCMOS Load
90% of Vdd Minimum
w/HCMOS Load
10% of Vdd Maximum
0.4Vdc to 2.4Vdc w/TTL Load; 20% to 80% of
Waveform w/HCMOS Load
5nSeconds Maximum
@1.4Vdc w/TTL Load; @50% w/HCMOS Load
@1.4Vdc w/TTL Load or w/HCMOS Load
50 ±10% (Standard)
50±5% (Optional)
A=±50ppm Min. / B=±100ppm Min. / C=±150ppm Min. / D=±200ppm Min. / E=±250ppm Min. /
F=±300ppm Min. / G=±350ppm Min.
1.4 ±0.2
(X4 plcs.)
1
5.08
±0.15
2
5.0
±0.2
7.0
±0.2
Marking Guide on page F3-F4
Metal
1.0
±0.2
(X6 plcs.) ⁶
5
4
1.4 ±0.2
(X6 plcs.)
1
5.08
2 _±0.15
3
Ceramic
1.7
Max.
2.20
±0.15
Pin 1: Control Voltage (Vc)
Pin 4: Case Ground
Pin 2: Output
Pin 3: Supply Voltage
Pin 1: Control Voltage (Vc) Pin 2: Tri-State or N.C. Pin 3: Ground
Pin 4: Output
Pin 5: N.C. or Tristate Pin 6: Supply Voltage
TEL [phone] FAX [phone] WEB http://www.caliberelectronics.com