SPT674 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – FAST, COMPLETE 12-BIT uP COMPATIBLE A/D CONVERTER WITH SAMPLE/HOLD

SPT674
FAST, COMPLETE 12-BIT µP COMPATIBLE
A/D CONVERTER WITH SAMPLE/HOLD
FEATURES
• Improved High-Performance Version of the HADC574Z
• Complete 12-Bit A/D Converter with Sample/Hold,
Reference and Clock
• Low Power Dissipation (120 mW Max)
• 12-Bit Linearity (Over Temp)
• 15 µs Max Conversion Time
• Single +5 V Supply
• Full Bipolar and Unipolar Input Range
APPLICATIONS
• Data Acquisition Systems
• 8 or 12-Bit µP Input Functions
• Process Control Systems
• Test and Scientific Instruments
• Personal Computer Interface
GENERAL DESCRIPTION
The SPT674 is a complete, 12-bit successive approximation
A/D converter manufactured in CMOS technology. The de-
vice is an improved version of the HADC574Z. Included on
chip are an internal reference, clock, and a sample-and-hold.
The S/H is an additional feature not available on similar
devices.
The SPT674 features 15 µs (max) conversion time of 10 or
20 V input signals. Also, a three-state output buffer is added
for direct interface to an 8, 12, or 16-bit µP bus.
The SPT674 has standard bipolar and unipolar input ranges
of 10 V and 20 V that are controlled by a bipolar offset pin and
laser trimmed for specified linearity, gain and offset accuracy.
The power supply is +5 V. The device also has an optional
mode control voltage which may be used depending on the
application. With a maximum dissipation of 120 mW at the
specified voltages, power consumption is about five times
lower than that of currently available devices.
The SPT674 is available in a 28-lead ceramic sidebrazed DIP
package in the commercial temperature range.
BLOCK DIAGRAM
Output
Nibble A
Nibble B
Three-State Buffers And Control
Nibble C
STS
12-Bit SAR
Clock
+
Comp
-
Control Logic
Ref
12/8 CS ^Ao R/C CE
Ref Out
12-Bit
Capacitance
DAC
Offset/Gain
Trim
20 V In
10 V In
BIP Off
AGND