SD10PU200 Datasheet, PDF (2/4 Pages) Bruckewell Technology LTD – Very low conduction losses

SD10PU200
High Current Density Surface Mount
Schottky Rectifier
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
Maximum repetitive peak reverse voltage
VRRM
SD10PU200
200
Working peak reverse voltage
VRWM
140
Maximum DC blocking voltage
VDC
200
Maximum average forward rectified current
IF(AV)
10
Peak forward surge current
8.3ms single half sine-wave superimposed
IFSM
160
on rated load (JEDEC Method)
Non-repetitive avalanche energy at 25 °C
IAS = 2 A per diode
EAS
30
Operating junction temperature range
TJ
-55 to +150
Storage temperature range
TSTG
-55 to +150
Note:
(1) Mounted on 30 mm x 30 mm Al P.C.B. with 50 mm x 25 mm x 100 mm fin heat sink
(2) Free air, mounted on recommended copper pad area
Electrical characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Instantaneous forward voltage at IF=5A, Tj=25°C
at IF=10A, Tj=25°C
VF
at IF=5A, Tj=125°C
at IF=10A, Tj=125°C
Maximum reverse current per leg
Tj=25°C
IR
at working peak reverse voltage
Tj=125°C
Value
Typical
Max
0.81
0.87
0.90
1.05
0.67
0.72
0.78
0.88
10
2
Unit
V
V
V
A
A
m’J
°C
°C
Unit
V
u’A
m’A
Thermal characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Typical thermal resistance
RθJA
RθJM
Notes:
(1) Mounted on 30 mm x 30 mm Al P.C.B.; thermal resistance RθJM - junction to mount
(2) Free air, mounted on recommended copper pad area
Value
90
4
Unit
°C/W
Publication Order Number: [SD10PU200]
© Bruckewell Technology Corporation Rev. A -2014