P6SMB6.8CA Datasheet, PDF (1/3 Pages) Bruckewell Technology LTD – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

P6SMB6.8CA-P6SMB440CA
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
VBR : 6.8 - 440 Volts
PPK : 600 Watts
FEATURES :
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Typical I_R less then 1μA above 10V
* Pb / RoHS Free
SMB (DO-214AA)
1.14 ± 0.38
0.1 ± 0.1
2.1 ± 0.15
3.62 ± 0.32
0.22 ± 0.07
2.28 ± 0.15
MECHANICAL DATA
* Case : SMB Molded plastic
* Epoxy : UL94V-0 rate flame retardant
* Lead : Lead Formed for Surface Mount
* Mounting position : Any
* Weight : 0.108 gram
Dimensions in millimeters
DEVICES FOR UNIPOLAR APPLICATIONS
For uni-directional without "C"
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
Symbol
P_PK
P_D
I_FSM
T_J, T_STG
Notes:
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on copper Lead area at 5.0 mm² ( 0.013 mm thick ).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum.
Page 1 of 3
Value
Minimum 600
5.0
100
- 55 to + 150
Unit
Watts
Watts
Amps.
°C