BWS-28-40-SA Datasheet, PDF (1/1 Pages) Bruckewell Technology LTD – 28mil 40V Standard Barrier

SCHOTTKY DIE SPECIFICATION
Product Name: BWS-28-40-SA
 
                                               
General Description:
ELECTRICAL CHARACTERISTICS
SYM
Reverse Breakdown Voltage: Ir=0.50mA
VBRM
  28mil 40V Standard Barrier
Spec. Limit
43
UNIT
Volt
Average Rectified Forward Current
IFAV
1.0
Amp
Maximum Instantaneous Forward Voltage
@ 1 Amperes, Ta=25℃
VF MAX
0.490
Volt
Maximum Instantaneous Reverse Current
VR= 40 Volt, Ta=25℃
IR MAX
0.050
mA
ESD Level
Level 2
±4kV (air)
(IEC61000-4-2 test method)
±4kV (contact)
MAXIMUM  RATINGS
Nonrepetitive Peak Surge Current
Semi-Sine Wave, Duty = 8.3ms、1cycle
IFSM
30
Amp
Operating Junction Temperature
Tj
125
℃
Storage Temperatures
TSTG
-50 to +150
℃
1. Specification is applied to die only. Actual performance may degrade when assembled. BW does not
guarantee device performance after assembly.
2. Suggest to storage in Nitrogen cabinet, 45-60% RH, 22-26 ℃ for 6 months.
3. Data sheet information is subjected to change without notice.
4. Suggest Soldering profile (Pb92.5%,5%Sn,Ag2.5%): Soldering peak Temp. 340~350 ℃ 3~5min.
5. According to the IEC61000-4-2 standard, contact discharge is the preferred test method. Air discharge
shall be used when contact discharge cannot be applied. In case of air discharge, the current level and
rise time are less reproducible and more related to environmental conditions (humidity, speed of the
tip approach etc.).
DICE  OUTLINE  DRAWING  
DIM
A
B
C
ITEM
Die Size
Top Metal Pad Size
Thickness
μm
711
591
254
Mil
28.00
23.30
10.00
(1)Cutting street width is around 40µm.
(2)Both of top-side and back-side metals are Ti/Ni/Ag.
(3) Top-side Ti/Ni thk: 0.42um, Ag thk: 3.5um
(4) Thickness(C) tolerance: +/-10um