BVS-166FE2-H Datasheet, PDF (3/5 Pages) Bright View Electronic Co., LTD. – SUPER BRIGHTNESS SMD LED

BRIGHT VIEW
ELECTRONICS CO.,LTD
SMD APPLICATION ( PB FREE SOLDERING )
Apply to BVS-3XX、1XX series.
Description:
(1) Manual soldering (We do not recommend this method strongly.)
(1.1) To prevent cracking,please bake (65℃,24hrs)before soldering.
(1.2) Temperature at tip of iron: 250℃ Max.(25W)
(1.3) It's banned to load any stress on the resin during soldering.
(1.4) Soldering time: 3 sec. Max.(one time only)
Soldering：
(2) Reflow Soldering
(2.1) To prevent cracking,please bake (65℃,24hrs)before soldering.
(2.2) When soldering,do not put stress on the LEDs during heating.
(2.3) Never take next process until the component is cooled down to room temperature after reflow.
(2.4) After soldering,do not warp the circuit board.
(2.5) The recommended reflow soldering profile(measuring on the surface of the LED resin)is following:
TEMPERATURE
The reflow temperature 240℃~245℃ is recommended and the soldering temperature
should be not higher than 245℃(one time only)
2008 / 6 / 2 - A