 English |
|
|
|
|
|
|
|
| BVM-TG21NAD1 Datasheet, PDF (3/3 Pages) Bright View Electronic Co., LTD. – 590mm / T9 / G13 LED TUBE | |||
| |||
| ◁ |
Bright View Electronics
LED TUBE
â Packaging
Each carton has 20 tubes.
590mm / T9 / G13 LED TUBE
â CAUTIONS
1. Voltage
A. Driver the product over the specified voltage rating (264VAC) will damage
the product.
B. Lower than 90VAC the product will not work normally.
C. Use DC source the product may not work normally.
2. Installation
A. For your safety please turn off the power before install the product.
B. Remove the starter from the luminaires. Starter may cause the tube work abnormally.
C. Remover the capacitor from the ballast.
D. This tube is not designed for rapid and instant type ballast. Do not apply the lamp in these luminaires.
3. Storage & Handling
A. The product should be storage in an environment with the relative humidity less than
90% RH (@30 degree C or less).
B. Warranty will be VOID if disassemble the lamp.
C. The priduct is not waterproof. Excess moisture may also damage the product.
Dateï¼2009/08/14
Pageï¼3 of 3
Version-A
|
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese