CS42516 Datasheet, PDF (68/90 Pages) Cirrus Logic – 110 dB, 192 kHz 6-Ch Codec with S/PDIF Receiver

CS42516
Indicates the received confidence status. This bit is updated on sub-frame boundaries.
6.25.6 BI-PHASE ERROR (BIP)
Default = x
0 - No error
1 - Bi-phase error. This indicates an error in the received bi-phase coding.
Function:
Indicates a bi-phase coding error. This bit is updated on sub-frame boundaries.
6.25.7 PARITY STATUS (PAR)
Default = x
0 - No error
1 - Parity Error
Function:
Indicates the Parity status. This bit is updated on sub-frame boundaries.
6.26 Receiver Errors Mask (address 27h)
7
6
5
4
3
Reserved
QCRCM
CCRCM
UNLOCKM
VM
2
CONFM
1
BIPM
0
PARM
Default = 00000000
Function:
The bits in this register serve as masks for the corresponding bits of the Receiver Errors register. If a
mask bit is set to 1, the error is unmasked, meaning that its occurrence will appear in the receiver
errors register, will affect the RERR interrupt, and will affect the current audio sample according to the
status of the HOLD bit. If a mask bit is set to 0, the error is masked, meaning that its occurrence will
not appear in the receiver error register, will not affect the RERR interrupt, and will not affect the cur-
rent audio sample. The CCRC and QCRC bits behave differently from the other bits: they do not affect
the current audio sample even when unmasked.
6.27 MuteC Pin Control (address 28h)
7
Reserved
6
Reserved
5
MCPolarity
4
M_AOUTA1
3
M_AOUTB1
2
M_AOUTA2
M_AOUTB2
1
M_AOUTA3
M_AOUTB3
6.27.1 MUTEC POLARITY SELECT (MCPOLARITY)
Default = 0
0 - Active low
1 - Active high
Function:
Determines the polarity of the MUTEC pin.
6.27.2 CHANNEL MUTES SELECT (M_AOUTXX)
Default = 1111
0
Reserved
68
DS583PP5