OPA344 Datasheet, PDF (4/11 Pages) Burr-Brown (TI) – LOW POWER, SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS MicroAmplifier ™ Series

ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, V+ to V- ................................................................... 7.5V
Signal Input Terminals, Voltage⁽²⁾ ..................... (V–) –0.5V to (V+) +0.5V
Current⁽²⁾ .................................................... 10mA
Output Short-Circuit⁽³⁾ .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Tolerance (Human Body Model) ............................................ 4000V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional opera-
tion of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage. ESD damage
can range from subtle performance degradation to complete
device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION
PRODUCT
PACKAGE
PACKAGE
DRAWING
NUMBER
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER⁽¹⁾
TRANSPORT
MEDIA
OPA344NA
"
OPA344UA
"
OPA344PA
SOT23-5
"
SO-8
"
8-Pin Dip
331
–40°C to +85°C
B44
OPA344NA /250
Tape and Reel
"
"
"
OPA344NA /3K
Tape and Reel
182
–40°C to +85°C
OPA344UA
OPA344UA
Rails
"
"
"
OPA344UA /2K5
Tape and Reel
006
–40° C to +85°C
OPA344PA
OPA344PA
Rails
OPA2344EA
"
OPA2344UA
"
OPA2344PA
OPA4344EA
"
OPA4344UA
"
OPA4344PA
MSOP-8
"
SO-8
"
8-Pin DIP
TSSOP-14
"
SO-14
"
14-Pin DIP
337
–40°C to +85°C
"
"
C44
OPA2344EA /250
Tape and Reel
"
OPA2344EA /2K5
Tape and Reel
182
–40°C to +85°C
OPA2344UA
OPA2344UA
Rails
"
"
"
OPA2344UA /2K5
Tape and Reel
006
–40°C to +85°C
OPA2344PA
OPA2344PA
Rails
357
–40°C to +85°C
OPA4344EA
OPA4344EA /250
Rails
"
"
"
OPA4344EA /2K5
Tape and Reel
235
–40°C to +85°C
OPA4344UA
OPA4344UA
Rails
"
"
"
OPA4344UA /2K5
Tape and Reel
010
–40°C to +85°C
OPA4344PA
OPA4344PA
Rails
OPA345NA
"
OPA345UA
"
SOT23-5
"
SO-8
"
331
–40°C to +85°C
A45
OPA345NA/250
Tape and Reel
"
"
"
OPA345NA/3K
Tape and Reel
182
–40°C to +85°C
OPA345UA
OPA345UA
Rails
"
"
"
OPA345UA/2K5
Tape and Reel
OPA2345EA
"
OPA2345UA
"
MSOP-8
"
SO-8
"
337
–40°C to +85°C
"
"
B45
OPA2345EA/250
Tape and Reel
"
OPA2345EA /2K5
Tape and Reel
182
–40°C to +85°C
OPA2345UA
OPA2345UA
Rails
"
"
"
OPA2345UA /2K5
Tape and Reel
OPA4345EA
"
OPA4345UA
"
TSSOP-14
"
SO-14
"
357
–40°C to +85°C
OPA4345EA
OPA4345EA/250
Tape and Reel
"
"
"
OPA4345EA /2K5
Tape and Reel
235
–40°C to +85°C
OPA4345UA
OPA4345UA
Rails
"
"
"
OPA4345UA /2K5
Tape and Reel
NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces
of “OPA344UA/2K5” will get a single 2500-piece Tape and Reel.
® _{OPA344, 2344, 4344}
OPA345, 2345, 4345
4