OPA132 Datasheet, PDF (3/7 Pages) Burr-Brown (TI) – High Speed FET-INPUT OPERATIONAL AMPLIFIERS

ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage .................................................... (V–) –0.7V to (V+) +0.7V
Output Short-Circuit⁽¹⁾ .............................................................. Continuous
Operating Temperature ................................................. –40°C to +125°C
Storage Temperature ..................................................... –40°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTE: (1) Short-circuit to ground, one amplifier per package.
PACKAGE INFORMATION
MODEL
Single
OPA132PA
OPA132P
OPA132UA
OPA132U
Dual
OPA2132PA
OPA2132P
OPA2132UA
OPA2132U
Quad
OPA4132PA
OPA4132UA
PACKAGE
PACKAGE DRAWING
NUMBER⁽¹⁾
8-Pin Plastic DIP
006
8-Pin Plastic DIP
006
SO-8 Surface-Mount
182
SO-8 Surface-Mount
182
8-Pin Plastic DIP
006
8-Pin Plastic DIP
006
SO-8 Surface-Mount
182
SO-8 Surface-Mount
182
14-Pin Plastic DIP
010
SO-14 Surface-Mount
235
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
ORDERING INFORMATION
MODEL
Single
OPA132PA
OPA132P
OPA132UA
OPA132U
Dual
OPA2132PA
OPA2132P
OPA2132UA
OPA2132U
Quad
OPA4132PA
OPA4132UA
PACKAGE
8-Pin Plastic DIP
8-Pin Plastic DIP
SO-8 Surface-Mount
SO-8 Surface-Mount
8-Pin Plastic DIP
8-Pin Plastic DIP
SO-8 Surface-Mount
SO-8 Surface-Mount
14-Pin Plastic DIP
SO-14 Surface-Mount
TEMPERATURE RANGE
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
®
3
OPA132, 2132, 4132