OPA2889 Datasheet, PDF (28/35 Pages) Burr-Brown (TI) – Dual, Low-Power, Wideband, Voltage Feedback OPERATIONAL AMPLIFIER with Disable

OPA2889
SBOS373 – JUNE 2007
INPUT AND ESD PROTECTION
The OPA2889 is built using a very high-speed
complementary bipolar process. The internal junction
breakdown voltages are relatively low for these very
small geometry devices. These breakdowns are
reflected in the Absolute Maximum Ratings table. All
device pins are protected with internal ESD
protection diodes to the power supplies, as shown in
Figure 64.
These diodes provide moderate protection to input
overdrive voltages above the supplies as well. The
protection diodes can typically support 30mA
continuous current. Where higher currents are
possible (for example, in systems with ±15V supply
parts driving into the OPA2889), current-limiting
series resistors should be added into the two inputs.
Keep these resistor values as low as possible since
high values degrade both noise performance and
frequency response.
+V_CC
www.ti.com
External
Pin
Internal
Circuitry
-V_CC
Figure 64. Internal ESD Protection
28
Submit Documentation Feedback