CS4297A Datasheet, PDF (22/52 Pages) Cirrus Logic – CrystalClear SoundFusion Audio Codec 97

CS4297A
4.5 PC_BEEP Volume Register (Index 0Ah)
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Mute 0
0
0
0
0
0
0
0
0
0 PV3 PV2 PV1 PV0 0
Mute
PC_BEEP Mute. Setting this bit mutes the PC_BEEP input signal.
PV[3:0]
PC_BEEP Volume Control. The PV[3:0] bits are used to control the gain levels of the PC_BEEP
input source to the Input Mixer. Each step corresponds to 3 dB gain adjustment, with
0000 = 0 dB. The total range is 0 dB to -45 dB attenuation.
Default
0000h. This value corresponds to 0 dB attenuation and Mute ‘clear’.
This register has no effect on the PC_BEEP volume during RESET#.
4.6 Phone Volume Register (Index 0Ch)
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Mute 0
0
0
0
0
0
0
0
0
0 GN4 GN3 GN2 GN1 GN0
Mute
GN[4:0]
Default
Phone Mute. Setting this bit mutes the Phone input signal.
Phone Volume Control. The GN[4:0] bits are used to control the gain levels of the Phone input
source to the Input Mixer. Each step corresponds to 1.5 dB gain adjustment, with 01000 = 0 dB.
The total range is +12 dB to -34.5 dB gain. See Table 4 on page 24 for further details.
8008h. This value corresponds to 0 dB gain and Mute ‘set’.
22