OPA4374 Datasheet, PDF (2/21 Pages) Burr-Brown (TI) – 6.5MHz, 585UA, Rail-to-Rail I/O CMOS Operational Amplifier

OPA373, OPA2373
OPA374
OPA2374, OPA4374
SBOS279D − SEPTEMBER 2003 − REVISED DECEMBER 2004
www.ti.com
PACKAGE/ORDERING INFORMATION⁽¹⁾
PRODUCT
PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
Shutdown
OPA373
″
OPA373
″
OPA2373
″
SOT23-6
″
SO-8
″
MSOP-10
″
DBV
″
D
″
DGS
″
−40°C to +125°C
″
−40°C to +125°C
″
−40°C to +125°C
″
A75
″
OPA373A
″
AYO
″
OPA373AIDBVT
OPA373AIDBVR
OPA373AID
OPA373AIDR
OPA2373AIDGST
OPA2373AIDGSR
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Non-Shutdown
OPA374
SOT23-5
DBV
−40°C to +125°C
A76
OPA374AIDBVT Tape and Reel, 250
″
″
″
″
″
OPA374AIDBVR Tape and Reel, 3000
OPA374
SO-8
D
−40°C to +125°C OPA274A
OPA374AID
Rails, 100
″
″
″
″
″
OPA374AIDR Tape and Reel, 2500
OPA2374
SOT23-8
DCN
−40°C to +125°C
ATP
OPA2374AIDCNT Tape and Reel, 250
″
″
″
″
″
OPA2374AIDCNR Tape and Reel, 3000
OPA2374
SO-8
D
−40°C to +125°C OPA2374A
OPA2374AID
Rails, 100
″
″
″
″
″
OPA2374AIDR Tape and Reel, 2500
OPA4374
SO-14
D
−40°C to +125°C OPA4374A
OPA4374AID
Rails, 58
″
″
″
″
″
OPA4374AIDR Tape and Reel, 2500
OPA4374
TSSOP-14
PW
−40°C to +125°C OPA4374A OPA4374AIPWT Tape and Reel, 250
″
″
″
″
″
OPA4374AIPWR Tape and Reel, 2500
(1) _{For the most current package and ordering information, see the Package Option Addendum located at the end of this datasheet.}
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V
Signal Input Terminals, Voltage(2) . . . . . . . . . −0.5V to (V+) + 0.5V
Current(2) . . . . . . . . . . . . . . . . . . . ±10mA
Output Short-Circuit(3) . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature . . . . . . . . . . . . . . . . . . . . . −55°C to +150°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . −65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300°C
(1) _{Stresses above these ratings may cause permanent damage.}
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
(2) _{Input terminals are diode-clamped to the power-supply rails.}
Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less.
(3) _{Short-circuit to ground, one amplifier per package.}
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
2