English
Language : 

OPA380 Datasheet, PDF (2/18 Pages) Burr-Brown (TI) – Precision, High-Speed Transimpedance Amplifier
OPA380
OPA2380
SBOS291E − NOVEMBER 2003 − REVISED NOVEMBER 2004
ABSOLUTE MAXIMUM RATINGS(1)
Voltage Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7V
Signal Input Terminals(2), Voltage . . . . . . . . . . −0.5V to (V+) + 0.5V
Current . . . . . . . . . . . . . . . . . . . . . ±10mA
Short-Circuit Current(3) . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature Range . . . . . . . . . . . . . . . −40°C to +125°C
Storage Temperature Range . . . . . . . . . . . . . . . . . −65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . . +300°C
ESD Rating (Human Body Model) . . . . . . . . . . . . . . . . . . . . . . . 2000V
(1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
(2) Input terminals are diode clamped to the power-supply rails. Input
signals that can swing more than 0.5V beyond the supply rails
should be current limited to 10mA or less.
(3) Short-circuit to ground; one amplifier per package.
PIN ASSIGNMENTS
Top View
www.ti.com
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
PACKAGE-LEAD
PACKAGE
MARKING
OPA380
MSOP-8
AUN
OPA380
SO-8
OPA380A
OPA2380
MSOP-8
BBX
(1) For the most current package and ordering information, see the
Package Option Addendum located at the end of this data sheet.
NC(1) 1
−In 2
+In 3
V− 4
OPA380
8 NC(1)
7 V+
6 Out
5 NC(1)
MSOP−8, SO−8
NOTES: (1) NC indicates no internal connection.
Out A 1
−In A 2
+In A 3
V− 4
OPA2380
MSOP−8
8 V+
7 Out B
6 −In B
5 +In B
2