OPA2381 Datasheet, PDF (2/19 Pages) Burr-Brown (TI) – Precision, Low Power, 18MHz Transimpedance Amplifier

OPA381
OPA2381
SBOS313B − AUGUST 2004 − REVISED NOVEMBER 2004
www.ti.com
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Voltage Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7V
Signal Input Terminals(2), Voltage . . . . . (V−) −0.5V to (V+) + 0.5V
Current . . . . . . . . . . . . . . . . . . . . . ±10mA
Short-Circuit Current(3) . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature Range . . . . . . . . . . . . . . . −40°C to +125°C
Storage Temperature Range . . . . . . . . . . . . . . . . . −65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . . +300°C
OPA381 ESD Rating (Human Body Model) . . . . . . . . . . . . . . . 2000V
OPA2381 ESD Rating (Human Body Model) . . . . . . . . . . . . . . 1500V
(1) _{Stresses above these ratings may cause permanent damage.}
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
(2) _{Input terminals are diode clamped to the power-supply rails. Input}
signals that can swing more than 0.5V beyond the supply rails
should be current limited to 10mA or less.
(3) _{Short-circuit to ground; one amplifier per package.}
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION⁽¹⁾
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
OPA381
MSOP-8
DGK
OPA381AIDGKT Tape and Reel, 250
−40°C to +125°C
A64
OPA381AIDGKR Tape and Reel, 2500
OPA381
DFN-8
DRB
OPA381AIDRBT Tape and Reel, 250
−40°C to +125°C
A65
OPA381AIDRBR Tape and Reel, 3000
OPA2381
MSOP-8
DGK
−40°C to +125°C
OPA2381AIDGKT Tape and Reel, 250
A62
OPA2381AIDGKR Tape and Reel, 2500
OPA2381
DFN-8
DRB
−40°C to +125°C
OPA2381AIDRBT Tape and Reel, 250
A63
OPA2381AIDRBR Tape and Reel, 3000
(1) _{For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.}
PIN ASSIGNMENTS
Top View
OPA381
OPA381
NC⁽¹⁾ 1
−In 2
+In 3
V− 4
8 NC⁽¹⁾
7 V+
6 Out
5 NC⁽¹⁾
NC⁽¹⁾ 1
−In 2
+In 3
V− 4
Exposed
Thermal
Die Pad
on
Underside
8 NC⁽¹⁾
7 V+
6 Out
5 NC⁽¹⁾
Out A 1
−In A 2
+In A 3
V− 4
MSOP−8
OPA2381
NOTE: (1) NC indicates no internal connection.
DFN−8
OPA2381
8 V+
7 Out B
6 −In B
5 +In B
Out A 1
−In A 2
+In A 3
V− 4
Exposed
Thermal
Die Pad
on
Underside
8 V+
7 Out B
6 −In B
5 +In B
MSOP−8
DFN−8
2