BUF06703 Datasheet, PDF (2/25 Pages) Burr-Brown (TI) – MULTI-CHANNEL LEC GAMMA CORRECTION BUFFER

BUF07703
BUF06703
BUF05703
SBOS269A – MARCH 2003 – REVISED JUNE 2003
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
Supply, VDD(2)
Input Voltage Range, VI
Continuous Total Power Dissipation
PARAMETERS
BUFXX703
UNIT
16.5
V
VDD
V
See Dissipation Rating Table
Operating Free–Air Temperature Range, TA
0 to +85
°C
Maximum Junction Temperature, TJ
150
°C
Storage Temperature Range, TSTG
–65 to 150
°C
Lead Temperature 1.6mm (1/16 inch) from Case for 10s
260
°C
(1) _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) _{All voltage values are with respect to GND.}
ORDERING INFORMATION
PRODUCT
PACKAGE–LEAD
PACKAGE
DESIGNATOR(1)
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
BUF07703
HTSSOP–20
PWP
0°C to +85°C
BUF07703PWP
BUF07703PWPR
BUF06703
TSSOP–16
BUF06703PW
PW
0°C to +85°C
BUF06703PWR
BUF05703
TSSOP–14
BUF05703PW
PW
0°C to +85°C
BUF05703PWR
(1) _{For the most current specification and package information, refer to our web site at www.ti.com.}
TRANSPORT MEDIA,
QUANTITY
Tube, 70
Reels, 2000
Tube, 90
Reels, 2000
Tube. 90
Reels, 2000
DISSIPATION RATING TABLE
PACKAGE TYPE
PACKAGE
DESIGNATOR
TSSOP–20 PowerPAD
PWP (20)
TSSOP–16
PW (16)
TSSOP–14
PW (14)
(1) _{Thermal specifications assume 2oz trace and copper pad with solder.}
θ_JC
( C/W)
1.40(1)
—
—
θ_JA
( C/W)
32.63(1)
108
112
TA ≤ 25°C
POWER RATING
3.83W(1)
1.15W
1.11W
RECOMMENDED OPERATING CONDITIONS
Supply Voltage, VDD
Operating Free-Air Temperature, TA
Junction Temperature
2
TSSOP-20 PowerPAD
TSSOP-16, 14
MIN
4.5
0
NOM
MAX
UNI
T
16 V
+85 °C
+125 °C
+150 °C