DAC7742 Datasheet, PDF (1/19 Pages) Burr-Brown (TI) – 16-Bit, Single Channel DIGITAL-TO-ANALOG CONVERTER With Internal Reference and Parallel Interface

DAC7742
DAC7742
SBAS256 – DECEMBER 2002
16-Bit, Single Channel
DIGITAL-TO-ANALOG CONVERTER
With Internal Reference and Parallel Interface
FEATURES
q LOW POWER: 150mW Maximum
q +10V INTERNAL REFERENCE
q UNIPOLAR OR BIPOLAR OPERATION
q SETTLING TIME: 5µs to ±0.003% FSR
q 16-BIT MONOTINICITY, –40°C TO +85°C
q ±10V, ±5V OR +10V CONFIGURABLE VOLTAGE
OUTPUT
q RESET TO MIN-SCALE OR MID-SCALE
q DOUBLE-BUFFERED DATA INPUT
q INPUT REGISTER DATA READBACK
q SMALL LQFP-48 PACKAGE
q SUPPORTS TRANSPARENT DATA INPUT
OPERATION
APPLICATIONS
q PROCESS CONTROL
q ATE PIN ELECTRONICS
q CLOSED-LOOP SERVO CONTROL
q MOTOR CONTROL
q DATA ACQUISITION SYSTEMS
DESCRIPTION
The DAC7742 is a 16-bit Digital-to-Analog Converter (DAC)
that provides 16 bits of monotonic performance over the
specified operating temperature range and offers a +10V,
low-drift internal reference. Designed for automatic test equip-
ment and industrial process control applications, the DAC7742
output swing can be configured in a ±10V, ±5V, or +10V
range. The flexibility of the output configuration allows the
DAC7742 to provide both unipolar and bipolar operation by
pin strapping. The DAC7742 includes a high-speed output
amplifier with a maximum settling time of 5µs to ±0.003%
FSR for a 20V full-scale change and only consumes 100mW
(typical) of power.
The DAC7742 features a standard 16-bit parallel interface with
double buffering to allow asynchronous updates of the analog
output, and data read-back to support data integrity verification
prior to an update. A user-programmable reset control allows
the DAC output to reset to min-scale (FFFF_H) or mid-scale
(7FFF_H) overriding the DAC register values. The DAC7742 is
available in an LQFP-48 package and three performance
grades specified to operate from –40°C to +85°C.
V_DD V_SS V_CC
REFADJ ^REFOUT ^REFIN
V_REF
REFEN
CS
R/W
RST
RSTSEL
+10V
Reference
Control
Logic
Buffer
R_OFFSET
RFB2
RFB1
Data I/O
16
I/O
Buffer
Input
Register
DAC
Register
DAC
SJ
V_OUT
AGND DGND
LDAC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 2002, Texas Instruments Incorporated