CS3310 Datasheet, PDF (1/18 Pages) Cirrus Logic – Stereo Digital Volume Control

CS3310
Stereo Digital Volume Control
Features
l Complete Digital Volume Control
— 2 Independent Channels
— Serial Control
— 0.5 dB Step Size
l Wide Adjustable Range
— -95.5 dB Attenuation
— +31.5 dB Gain
l Low Distortion & Noise
— 0.001% THD+N
— 116 dB Dynamic Range
l Noise Free Level Transitions
l Channel-to-Channel Crosstalk Better Than
110 dB
I
Description
The CS3310 is a complete stereo digital volume control
designed specifically for audio systems. It features a 16-
bit serial interface that controls two independent, low dis-
tortion audio channels.
The CS3310 includes an array of well-matched resistors
and a low noise active output stage that is capable of
driving a 600 Ω load. A total adjustable range of 127 dB,
in 0.5 dB steps, is achieved through 95.5 dB of attenua-
tion and 31.5 dB of gain.
The simple 3-wire interface provides daisy-chaining of
multiple CS3310’s for multi-channel audio systems.
The device operates from ±5 V supplies and has an in-
put/output voltage range of ±3.75 V.
ORDERING INFORMATION
CS3310-KP 0° to 70° C
CS3310-KS 0° to 70° C
16-pin Plastic DIP
16-pin Plastic SOIC
AINL ¹⁶
AGNDL ¹⁵
AGNDR
10
9
AINR
+
-
MUX
8
8
Control
Register
8
8
MUX
-
+
12 13
4
VA+ VA- VD+
16
Serial to
Parallel
Register
14
AOUTL
8
MUTE
1
ZCEN
2
CS
3 _SDATAI
7 _SDATAO
6
SCLK
5
DGND
11
AOUTR
Preliminary Product Information
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Products from
P.O. Box 17847, Austin, Texas 78760
[phone] FAX: [phone]
http://www.crystal.com
Copyright © Cirrus Logic, Inc. 1999
(All Rights Reserved)
FEB ‘99
DS82PP3
1