HBO100A-48-1.8 Datasheet, PDF (1/8 Pages) Broadband TelCom Power, Inc. – 48Vin 1.8Vout 100A

BTCPower TM Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
Prelim. Specification
HBO100A-48-1.8, HBO100A-48-1.8N
48Vin 1.8Vout 100A
Description
The HBO100A -48-1.8 of low cost half brick DC/DC
converters are comparable to existing half-bricks. They
are targeted specifically at the telecommunication,
industrial electronics, mobile telecommunication and
distributed power markets. With a wide input voltage
range of 36-75V they are available with output voltage
of either 1.5, 1.8, 2.5, 3.3 or 5 Volts. All models feature
an input filter, input undervoltage lockout, output
overvoltage and overtemperature protection, output
current limiting and short circuit protection. The unique
open-frame construction with aluminum heat spreader
design achieves efficient heat transfer with no hot
spots.
Applications
• Telecommunications
• Data Communications
• Wireless Communications
• Networking Gear
• Servers, Switches and Data Storage
• Semiconductor Test Equipment
• Distributed Power Architecture
Features
• Delivers up to 100A in half brick
• No minimum load required
• Low profile of only 0.36 inch
• 1.5V, 1.8V, 2.5V, 3.3V or 5V output models
• Wide input operating range 36-75V
• -40°C to +100°C ambient operation
• On/Off pin and remote sense
• Output adjustment +10% and –10% range
• 1500V, 10M input-to-output isolation
• Meets Basic Insulation requirements of
EN60950
• UL 1950 recognized, TUV EN60950 and CSA
C22.2 No. 60950-00 Certified (pending)
• Meets conducted limits of FCC Class B and
CEI IEC61204-3 Class B with external filter
• MTBF of 1,000,000 hours @ 50°C
(Bellcore)
Broadband TelCom Power, Inc. 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: [phone] • Fax: [phone] • www.btcpower.com • Email: [e-mail] • PS HBO100A-48-1.8 Rev1.2 12-8-03