HBO-HBP Datasheet, PDF (1/2 Pages) Broadband TelCom Power, Inc. – Up to 350W/100A Half Bricks

BTCPower TM Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
HBO or HBP CPH Series
Up to 350W/100A Half Bricks
Description
The HBO (open-frame) or HBP (enclosure-frame) CPH
series of low cost DC/DC converters offer the different
current levels and are comparable to existing half-bricks.
With a wide input voltage range of 18-24V or 36-75V they
are available with an output voltage of either 1.5, 1.8, 2.5,
3.3, or 5 Volts. All models feature an input filter, output
overvoltage and overtemperature protection, output current
limiting and short circuit protection. The HBO series open-
frame construction with base-plate and HBP series
enclosure frame achieve efficient heat transfer with no hot
spots. The use of patented Flat Transformer technology and
other patent-pending design concepts facilitate maximum
power delivered. The converters combine creative design
concepts with highly derated power devices to achieve very
high reliability, high performance and offer a low cost
solution to systems designers that are challenged to
maximize power and minimize board space.
Features
• Delivers up to 350W / 100A in Half Brick
• High efficiency patented topology
• Low profile of only 0.36 inch
• 1.5V, 1.8V, 2.5V, 3.3V, or 5V output modules
• 100V/100ms (50V/100ms for 24V model) Input transient
capability
• -40°C to +100 °C ambient operation
• Meets Basic Insulation requirements of EN60950
• UL 1950 recognized, CAN / CSA C22.2 No. 950-95
Certified, and TUV EN60950 ( pending )
• Meets conducted limits of FCC Class B and CEI
IEC61204-3 Class B with external filter
Applications
• Telecommunications
• Data Communications
• Wireless Communications
• Networking Gear
• Servers, Switches and Data Storage
• Semiconductor Test Equipment
• Distributed Power Architecture
Specification Summary
• 100A @ 1.5V, 100A @ 1.8V, 80A @ 2.5V,
70A @ 3.3V, 70A @ 5.0V,
• Tight output regulation, typical ±2%
• No minimum load required
• Ripple & Noise (20Mhz BW) 100 mV (pk-pk)
or 2% (pk-pk)
• Wide input operating range 18-36V or 36-75V
• On/Off pin and remote sense
• Output adjustment +/-10% range
• 1500V, 10M input-to-output isolation
• Frame construction with heat spreader for low
temperature rise
• Output overcurrent and overvoltage protection
• Over Temperature protection
• Input Under voltage protection
• MTBF of 1,600,000 hours @ 50°C ( Bellcore )
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: [phone] • Fax: [phone] • www.btcpower.com • Email: [e-mail] PB HBO/HBP CPH Rev1 4-7-03