BL-HUB35A-AV-TRB Datasheet, PDF (6/8 Pages) BRIGHT LED ELECTRONICS CORP – Automotive : Dashboards, stop lamps, turn signals.

BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BL-HUB35A-AV-TRB
● Reliability Test
Classification Test Item
Reference Standard
Operation Life MIL-STD-750:1026
MIL-STD-883:1005
JIS-C-7021 :B-1
High
Temperature MIL-STD-202:103B
Endurance
Test
High Humidity
Storage
High
Temperature
Storage
JIS-C-7021 :B-11
MIL-STD-883:1008
JIS-C-7021 :B-10
Low
Temperature
Storage
JIS-C-7021
:B-12
Temperature MIL-STD-202:107D
Cycling
MIL-STD-750:1051
MIL-STD-883:1010
JIS-C-7021 :A-4
Environmental ^{Thermal Shock MIL-STD-202:107D}
Test
MIL-STD-750:1051
MIL-STD-883:1011
Solder
Resistance
MIL-STD-202:201A
MIL-STD-750:2031
JIS-C-7021 :A-1
Test Conditions
Connect with a power If=20mA
Ta=Under room temperature
Test time=1,000hrs
Ta=+65℃±5℃
RH=90%-95%
Test time=240hrs
High Ta=+85℃±5℃
Test time=1,000hrs
Low Ta=-40℃±5℃
Test time=1,000hrs
-40℃ ~ +25℃ ~ +85℃ ~ +25℃
60min 20min 60min 20min
Test Time=5cycle
-40℃±5℃ ~+85℃±5℃
20min
20min
Test Time=10cycle
Preheating：
140℃-160℃,within 2 minutes.
Operation heating：
260℃(Max.), within 10seconds. (Max.)
Result
0/20
0/20
0/20
0/20
0/20
0/20
0/20
● Judgment criteria of failure for the reliability
Measuring items
Symbol Measuring conditions Judgement criteria for failure
佰鴻工業股份有限公司 ^{Forward voltage}
Reverse current
V_F ( V)
I_R(uA)
I_F=20mA
V_R=5V
Over Ux1.2
Over Ux2
Luminous intensity Iv ( mcd )
I_F=20mA
Below SX0.5
http://www.brtled.com _{Note: 1.U means the upper limit of specified characteristics. S means initial value.}
2.Measurment shall be taken between 2 hours and after the test pieces have been returned to
normal ambient conditions after completion of each test.
Ver.1.2 Page 5 of 7