BL-PDG-CRS-C10 Datasheet, PDF (3/8 Pages) BRIGHT LED ELECTRONICS CORP – AlInGap DOMILED High brightness surface mount LED.

AMERICAN BRIGHT OPTOELECTRONICS CORP.
AlInGap DOMILED BL-PDx-xRS Series
Part Ordering Number
BL-PDO-CRS-C10
• BIN R1
• BIN R2
• BIN S1
• BIN S2
Chip Technology /
Color
AlInGaP
Orange, 605nm
Viewing
Angle
120
Luminous Intensity @ IF=20mA
Iv (mcd)
112.5 – 285.0
112.5 – 140.0
140.0 – 180.0
180.0 – 224.0
224.0 – 285.0
BL-PDO-SRS-C10
• BIN S1
• BIN S2
• BIN T1
• BIN T2
180.0 – 450.0
180.0 – 224.0
224.0 – 285.0
285.0 – 355.0
355.0 – 450.0
BL-PDY-CRS-C10
• BIN R1
• BIN R2
• BIN S1
• BIN S2
AlInGaP
120
Yellow, 587nm
112.5 – 285.0
112.5 – 140.0
140.0 – 180.0
180.0 – 224.0
224.0 – 285.0
BL-PDY-SRS-C10
• BIN S1
• BIN S2
• BIN T1
• BIN T2
180.0 – 450.0
180.0 – 224.0
224.0 – 285.0
285.0 – 355.0
355.0 – 450.0
BL-PDY-TRS-C10
• BIN T1
• BIN T2
• BIN U1
• BIN U2
TS AlInGaP
120
Yellow, 590nm
285.0 – 715.0
285.0 – 355.0
355.0 – 450.0
450.0 – 560.0
560.0 – 715.0
BL-PDG-CRS-C10
AlInGaP
120
• BIN P1
Green, 572nm
• BIN P2
• BIN Q1
• BIN Q2
45.0 – 112.5
45.0 – 56.0
56.0 – 71.5
71.5 – 90.0
90.0 – 112.5
BL-PDG-SRS-C10
• BIN Q1
• BIN Q2
• BIN R1
• BIN R2
71.5 – 180.0
71.5 – 90.0
90.0 – 112.5
112.5 – 140.0
140.0 – 180.0
NOTE:
1. Other luminous intensity groups are also available upon request.
2. Luminous intensity is measured with an accuracy of ±11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength
group is allowed for each reel.
4. An optional Vf binning is also available upon request. Binning scheme is as per following table.
V.2 Page: 3 of 8