BPD-BQD934 Datasheet, PDF (1/3 Pages) BRIGHT LED ELECTRONICS CORP – END- LOOK PACKAGE PIN PHOTO DIODE

BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BPD-BQD934(早安&A4G)
END- LOOK PACKAGE
PIN PHOTO DIODE
z Features
1. Wide receiving angle
2. Linear response vs. irradiance
3. Fast switching time
4. End-looking Package ideal for space
limited applications
5. Lens Appearance: Black
6. This product doesn't contain restriction
substance, comply ROHS standard
●Package Dimensions:
5.0(.197)
1.0(.039)
1.5(.059) MAX.
8.6(.339)
5.7(.224)
Anode
23.4(.921) MIN.
Cathode
z Description
The BPD-BQD934 device consists
of a PIN silicon photodiode molded in
a black epoxy package which allows
spectral response
infrared light wavelengths. The wide
receiving angle provides relatively even
reception over a large area. The
end-looking package is designed for
easy PC board mounting. This photodiode
is mechanically and spectrally matched to
BRIGHT’s GaAs and GaAlAs series of infrared
emitting diodes.
0.5(.020) SQ.TYP.
1.0(.039)MIN.
2.54(.100) NOM.
NOTES:
1.All dimensions are in millimeters (inches).
2.Tolerance is ±0.25mm (0.01”) unless otherwise specified.
3.Lead spacing is measured where the leads emerge from the package
4. Specifications are subject to change without notice
z Absolute Maximum Ratings(Ta=25℃)
Parameter
Power Dissipation
Reverse Breakdown Voltage
Operating Temperature
Storage Temperature Range
Lead Soldering Temperature
Maximum Rating
Unit
100
mW
60V
-45℃~+85℃
-45℃~+100℃
260℃ for 5 seconds
Rev.1.0 Page:1 of 3