BPD-BQAA34 Datasheet, PDF (1/3 Pages) BRIGHT LED ELECTRONICS CORP – END- LOOK PACKAGE PIN PHOTO DIODE

BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BPD-BQAA34
END- LOOK PACKAGE
PIN PHOTO DIODE
z Features
1. Wide receiving angle
2. Linear response vs. irradiance
3. Fast switching time
4. End-looking Package ideal for space
limited applications
5. Lens Appearance: Black
6. This product doesn't contain restriction
substance, comply ROHS standard
z Description
The BPD-BQAA34 device consists
of a PIN silicon photodiode molded in
a black epoxy package which allows
spectral response
infrared light wavelengths. The wide
receiving angleprovides relatively even
reception over a large area. The
side-looking package is designed for
easy PC board mounting. This photodiode
is mechanically and spectrally matched to
BRIGHT’s GaAs and GaAlAs series of infrared
emitting diodes.
●Package Dimensions:
5.0(.197)
1.0(.039)
1.5(.059) MAX.
8.6(.339)
Anode
23.4(.921) MIN.
0.5(.020) SQ.TYP.
Anode
1.00(.039) MIN.
2.54(.100) NOM.
Cathode
5.7(.224)
Cathode
NOTES:
1.All dimensions are in millimeters (inches).
2.Tolerance is ±0.25mm (0.01’) unless otherwise specified.
3.Lead spacing is measured where the leads emerge from the package
4. Specifications are subject to change without notice
z Absolute Maximum Ratings(Ta=25℃)
Parameter
Power Dissipation
Reverse Breakdown Voltage
Operating Temperature
Storage Temperature Range
Lead Soldering Temperature
Maximum Rating
Unit
100
mW
60V
-45℃~+85℃
-45℃~+100℃
260℃ for 5 seconds
Rev.2.1 Page:1 of 3