BL-XE1361-TR9 Datasheet, PDF (1/6 Pages) BRIGHT LED ELECTRONICS CORP – SURFACE MOUNT CHIP LED LAMPS SPECIFICATION

BRIGHT LED ELECTRONICS CORP.
SURFACE MOUNT CHIP LED LAMP SPECIFICATION
●COMMODITY：AXIAL TYPE LED
●DEVICE NUMBER：BL-XE1361-TR9
●ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta=25℃)
PAGE:
2
REVISION: 1.0
Emitted
Color
Chip
Peak Dominant ^Lens
Absolute Maximum
Rating
Electro-optical
Data (At 20mA)
Viewing
Angle
Wave Wave
Length Length ^{Appearance Δλ Pd}
If Peak
Vf(V)
Iv(mcd) ^2θ1/2
(deg)
λP(nm) λd(nm)
(nm) (mW) (mA) If(mA) _{Typ. Max. Min. Typ.}
Hi-Eff Red
640 628±5 Water Clear 40 80 30 100 2.0 2.6 18.5 40.0 35
Remark：1.Viewing angle is the Off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. This product doesn’t contain restriction substance ,comply ROHS standard
●ABSOLUTE MAXIMUN RATINGS (Ta=25℃)
Reverse Voltage ………………………………………..……………………………….…..……………………….… 5V
Reverse Current (V_R=5V) …………………………………………….………………………………………….. 100µA
Operating Temperature Range ……………………………………………..……….……………..…… -25℃ 〜 80℃
Storage Temperature Range ……………………………………………………………………..…… -30℃ 〜 85℃
Preheating Temperature ………………………………..……………..………….… 100℃ ~ 150℃ Within 2 Minutes
Soldering Temperature ………………………………..……………..………..…… 240℃ ~ 250℃ Within 5 Seconds
●PACKAGE DIMENSIONS
NOTES: 1.All dimensions are in millimeters (inches).
2.Tolerance is ± 0.25mm (0.01”) unless otherwise specified.
3.Specifications are subject to change without notice.