ENG3096V Datasheet, PDF (1/3 Pages) BOWIN ELECTRONIC CO. – 6/12-LED LOTTO GAME IC

M3096V
P. 1
6/12-LED LOTTO GAME IC
■ Description
■ Feature
M3096V is a low voltage 6/12-LED controller IC CMOS technology
specially design for lotto game.
Operating voltage：1.35~5.00V DC
The IC requires minimal external components.
■Application Example
Low standby current < 5µA (@3VDC)
Maximum 12 LED can be connected as：
─ 12 or 6 LED, LCN as center LED, IC
will automatically stop after 6
12 lamps lotto game
seconds
─ 10 or 5 or 2 LED, use power on/off
6 lamps dice game
LED will chase sequentially for a few
10 lamps bingo game
cycles and randomly stop at one
LED.
5 lamps bingo game
IC directly drives piezo buzzer and
2 lamps big or small game
generates sound effect which changes
10+2 lamps big or small game
with LED chasing speed
Other lotto games
Single trigger input (High Level)
■Product type
Part number
M3096V
3906P
Package type
Chip form
16 pin DIP
Explanation (reference to P.3 application circuits)
1. 12 or 6 LED + 1 LED (center LCN LED,auto chasing)
(1) Holding SW, 12 LED start to flash sequentially. LCN LED flashes indepently.
(2) After released SW, 10 and LCN LED start to slow down flashing speed
(3) When it stops at one LED, LCN LED keeps flashing.
(4) After 10 seconds, all LED turn off. IC enters standby mode. Retriggering SW will re-start
the above sequence.
(5) IC can be connected as 12 or 6 LED application.
2. 10 or 5 LED + 2 LED ( two center LCN LED, for big or small)
(1) Holding SW1,10 LED start to flash sequentially. Two LCN LED do not flash.
(2) After released SW1, 10 LED start to slow down flashing speed.
(3) When it stops at one LED. Press SW2, LCN(11^st and 12^nd ) LED will flash and stop at one.
(4) IC can be connected as 5, 10, 2 LED.
(5) Using only 11^st and 12^nd LED is for 2-LED application.
-3096 ---
1