BPM-01 Datasheet, PDF (1/1 Pages) BOWEI Integrated Circuits CO.,LTD. – BPSK Modulatior

BOWEI
BOWEI INTEGRATED CIRCUITS CO.,LTD.
BPM-XX/BPM-XXM
BPSK Modulator
Features
●Frequency range:1～1200MHz
●Low Conversion loss
●High carrier suppression
●Low Conversion Loss,50 Ω impedance
●Hermetic TO-8C SG03 package available
●Operating temperature range:-55℃～+85℃
Specifications( measured in a 50Ωsystem, TA=:25℃)
Model
Carrier
Fre q ue n cy
(Max)
IL
Max
( _dB )
Amplitude _Phase ^{Gain 1dB} _Carrier
Imbalance
Imbalance
Compression _Rejection
Input power
VSWR
Max Max _{Min Min Max}
( _dB) (d eg) (dBm) (dBc)
BPM-01 _20～500 3. 0 _{±0. 1} ±2 +3 30 1. 5:1
BPM-02A/02AM 1～300 3. 0 0. 3 ±2 +2 40 1. 5:1
BPM-02B/02BM 1～300 _{3. 0} 0. 3 ±2 +10 40 1. 5:1
BPM-03A/03AM 10～500 _{3. 2 0. 3} ±2 +2 30 1. 7:1
BPM-03B/03BM 10～500 _{3. 0} 0. 4 _±2. 5 _{+10 30} 1. 7:1
BPM-04A/04AM 50～900 4. 5 _{0. 4} ±3 +2 30 2. 0:1
BPM-04B/04BM _{50～900 4. 5 0. 4} ±_{3 +10} 30 _{2. 0:1}
BPM-05A/05AM 800～1200 _{3. 5} 0. 5 ±3 ₊₂ 30 1. 5:1
BPM-05B/05BM _{800～1200 3. 5} 0. 5 _{±3 +10 30} 1. 5:1
BPM-04A Typical Performance
Conversion loss vs. Frequency
Amplitude balance vs. Frequency
Notes
1.BPM-01 has the DIP-14A package. TO-8C package is
provided for BPM-XX and SG03 for BPM-XXM.
2.Only BPM-01 has internal TTL driver, the rest can also
integrate TTL driver within DIP-14A package.
Application Notes:
Vtrol
1.Functional schematic shown as right
2.External driver and current limiting
resistor(180-220ohm)are required to
provide control current ±20mA
Logic1: ^+20mA(Typ)
Logic0: -20mA(Typ)
3. See assembly section for mounting information
Mark
1
4
2
3
TO-8C Bottom View
Mark
Pin connection:
Pin1:Voutrol
4
1
Pin2: RF iNput
3
2
Pin3: GND
Pin4 : Mod ul ated RF ou tpu t
SG03 Bottom View
VS WF VS Fequency
Phase balance vs. Frequency
● TEL:[phone] 87091887 ● FAX:[phone] ● http://www.cn-bowei.com ● E-mail:[e-mail]
67