LSP0600BJR-S Datasheet, PDF (5/6 Pages) Bourns Electronic Solutions – LED Shunt Protector

SMB (DO-214AA)
Tape Dimensions
SMB (DO-214AA) Package Single-Sprocket Tape
3.90-4.10
(.154-.161)
1.95-2.05
(.077-.081)
DIA.
1.50
(.059)
MIN.
DIA. ^1.55-1.65
(.061-.065)
1.65-1.85
(.065-.073)
0.40
(.016)
MAX.
5.45-5.55
(.215-.219)
11.70-12.30
(.461-.484)
8.20
(.323)
MAX.
Direction of Feed
7.90-8.10
(.311-.319)
Index Mark
(if needed)
Carrier Tape
Embossment
0 MIN.
Cover
Tape
4.50
(.177)
MAX.
20°
Maximum component
rotation
Typical component
cavity center line
DIMENSIONS ARE : ^MILLIMETERS
(INCHES)
Typical component
center line
NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in) MIN. to 0.65 mm (.026 in)
MAX. so that the component cannot rotate more than 20 ° within the determined cavity.
B. Taped devices are supplied on a reel of the following dimensions:-
Reel diameter:
330 mm ±3.0 mm (12.99 in ±.118 in)
Reel hub diameter: 75 mm (2.95 in) MIN.
Reel axial hole: 13.0 mm ±0.5 mm (.512 in ±.020 in)
C. 3000 devices are on a reel.
MD-SMB-002-a
AUGUST 2003
Specifications are subject to change without notice.
2
Customers should verify actual device performance in their specific applications.