MF-NSMF Datasheet, PDF (4/5 Pages) Bourns Electronic Solutions – PTC Resettable Fuses

MF-NSMF Series - PTC Resettable Fuses
Solder Reflow Recommendations
300
Preheating
Soldering
250
200
150
100
50
0
Cooling
160–220
10–20
120
Time (seconds)
Notes:
• MF-NSMF models cannot be wave soldered. Please contact Bourns for
hand soldering recommendations.
• If reflow temperatures exceed the recommended profile, devices may not
meet the performance requirements.
• Compatible with Pb and Pb-free solder reflow profiles.
• Excess solder may cause a short circuit, especially during hand soldering.
Please refer to the Multifuse^® Polymer PTC Soldering Recommendation
guidelines.
MF-NSMF SERIES, REV. U, 06/17
“freeXpansion Design” is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.