English
Language : 

TISP6NTP2A Datasheet, PDF (3/9 Pages) Bourns Electronic Solutions – QUAD FORWARD-CONDUCTING BUFFERED P-GATE THYRISTORS
◁
TISP6NTP2A Programmable Protector
Recommended Operating Conditions
CG
R1, R2
Gate decoupling capacitor
Series resistor for GR-1089-CORE first-level surge survival
Series resistor for ITU-T recommendation K.20
Series resistor for ITU-T recommendation K.21
Series resistor for IEC 61000-4-5:1995, class 5, 1.2/50 or 10/700
Min. Typ. Max. Unit
100 220
nF
40
12
Ω
20
4
Electrical Characteristics for any Section, TA = 25 °C (Unless Otherwise Noted)
Parameter
Test Conditions
Min. Typ. Max. Unit
ID
V(BO)
t(BR)
VF
VFRM
tFR
IH
IGKS
IGAT
Off-state current
Breakover voltage
Breakdown time
Forward voltage
Peak forward recovery
voltage
Forward recovery time
Holding current
Gate reverse current
Gate reverse current,
on state
VD = VDRM, IG = 0
TJ = 25 °C
TJ = 85 °C
IT = -20 A, IEC 61000-4-5:1995 combination impulse generator,
VGG = -50 V
IT = -18 A, I3124 impulse generator, VGG = -50 V
IT = -18 A, I3124 impulse generator, V(BR) < -50 V
IF = 0.6 A, tw = 500 µs, VGG = -50 V
IF = 18 A, tw = 500 µs, VGG = -50 V
IF = 20 A, IEC 61000-4-5:1995 combination impulse generator,
VGG = -50 V
IF = 18 A, I3124 impulse generator, VGG = -50 V
IF = 18 A, I3124 impulse generator,
VGG = -50 V
VF > 10 V
VF > 5 V
IT = -1 A, di/dt = 1A/ms, VGG = -50 V, TJ = 85 °C
VGG = VGKRM, VAK = 0
TJ = 25 °C
TJ = 85 °C
IT = -0.6 A, tw = 500 µs, VGG = -50 V
-150
-5
µA
-50
µA
-70
V
-70
2
µs
3
5
V
15
V
15
2
4
µs
mA
-5
µA
-50
µA
-1
mA
Gate reverse current,
IGAF
forward conducting
IF = 0.6 A, tw = 500 µs, VGG = -50 V
state
-40
mA
IGT
Gate trigger current
IT = -5 A, tp(g) ≥ 20 µs, VGG = -50 V
VGT
Gate trigger voltage IT = -5 A, tp(g) ≥ 20 µs, VGG = -50 V
Anode-cathode off-
CAK
state capacitance
f = 1 MHz, Vd = 1 V, IG = 0, (see Note 3)
VD = -3 V
VD = -50 V
5
mA
2.5
V
100
pF
60
pF
NOTE 3: These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The unmeasured
device terminals are a.c. connected to the guard terminal of the bridge.
Thermal Characteristics
RθJA
Parameter
Junction to free air thermal resistance
Test Conditions
Ptot = 0.52 W, TA = 85 °C, 5 cm2, FR4 PCB
Min. Typ. Max. Unit
160 °C/W
222
JUNE 1998 - REVISED OCTOBER 2000
Specifications are subject to change without notice.
 ▷