3314G-1-203E Datasheet, PDF (3/5 Pages) Bourns Electronic Solutions – 3314 - 4 mm Square Trimpot Trimming Potentiometer

3314 - 4 mm Square Trimpot^® Trimming Potentiometer
Product Dimensions
3314Z-1-(RC) E
(Cross Slot)
12 3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
3314Z-GA4-(RC) E
(Straight Slot)
12 3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
3314Z-3
(Reverse Marking, Straight Slot)
12 3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
3314Z-4-(RC) E
(Reverse Marking, Cross Slot)
12 3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
3314Z
Common Dimensions
1.27
(0.50)
2.54
(0.10)
1.19
(0.047)
3.32
(0.131)
1.29
(0.051)
5.01
(.197)
3.18
(.125)
0.61
(.024)
5.56
(0.219)
3.08
(0.121)
0.96
(.038)
5.76
(0.227)
RECOMMENDED PCB LAYOUT
2.54
(0.10)
1.3
(0.051)
3.48
(.137)
2.01
(.079)
2.01
(.079)
0.26
(.010)
0.21
(.008)
2.01
(.079)
2 ^WIPER
CCW ₁
CLOCKWISE
3 CW
Packaging Specifications
(J, G Styles)
TAPE
.30 _MAX.
(.012)
2.74 ± 0.10
(.108 ± .004)
DIA.
1.50 + 0.10/ - 0.00
(.059 + .004/ - .000)
4.00 ± 0.10
(.157 ± .004)
5.50 ± 0.5
(.217 ± .020)
5.26 ± 0.10 _(J)
(.207 ± .004)
6.45
(.254
±
±
0.10
.004)
(G)
2.00 ± 0.05
(.079 ± .020)
5.26 ± 0.10
(.207 ± .004)
1.75 ± 0.10
(.069 ± .004)
12.00 ± 0.30
(.472 ± .012)
8.00 ± 0.20
(.315 ± .008)
DIA.
1.50 + 0.10/ - 0.00
(.059 + .004/ - .000)
REEL
MIN.
1.50
(.059)
EQUAL SPACED 3 PLCS.
13.0 ± 0.51
(.512 ± .020)
DIA.
20.2
(.795)
MIN. DIA.
18.4
(.724)
MAX.
(MEASURED
AT
HUB)
50.00
(1.969)
MIN.
177.8 ± 2.03
(7.00 ± .080)
DIA.*
(1333.00.02±±.20.709)DIA.**
12.4 + 2.01/ -.000
(.488 + .079/ - .000)
(MEASURED AT HUB)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
DIMENSIONS:
TOLERANCES: ±
0.25
(.010)
MM
(INCHES)
EXCEPT WHERE NOTED
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.