SA2-2400-DBB-STD Datasheet, PDF (2/4 Pages) Bourns Electronic Solutions – SA2 Series High Voltage Gas Discharge Tube

SA2 Series High Voltage Gas Discharge Tube
Environmental Characteristics
Section
Category
Test
Condition
IEC 60068-2-13 test M
IEC 60068-2-1, test Ab
IEC 60068-2-2, test Bb
IEC 60068-2-30, test Ca
IEC 60068-2-14, test Na
IEC 60068-2-6, test Fc
IEC 60068-2-27, test Ea
IEC 60068-2-20, test Ta
IEC 60068-2-20, test Tb
IEC 60068-2-21
Operational Low Air Pressure
Temp. +55 °C, Time 0.5 Sec., Pressure 600 hPa
Non-
Operational
Cold
Dry Heat
Damp Heat, Steady State
Rapid Change in Temperature
Vibration
Shock Test
Solderability
Resistance to Soldering Heat
Robustness of Terminations
+40 °C, 96 Hours
+100 °C, 96 Hours
+40 °C, 93 % RH, 21 Days
Upper Temp. +100 ° C, Lower Temp. -40 °C, 5 Cycles
10-55 Hz, 30 Min. per Axis, Double Amplitude 0.70 Min.
30 g, 11 ms, Half Sine Pulse
Method 1, +235 °C, 2 Sec., Aging
Method 1A, +260 °C, 5 Sec.
Ua1 (Tensile), Ua2 (Thrust), Ub (Bending) and Uc (Torsion)
How to Order
Series Designator
No. of Electrodes
2 = 2 Electrodes
Breakdown Voltage
2400 = 2400 V
3000 = 3000 V
3600 = 3600 V
5500 = 5500 V
6200 = 6200 V
6300 = 6300 V
7200 = 7200 V
Tolerance
C = -20 % to +20 %
D = -15 % to +20 %
Lead Shape
B = Bent Leads*
C = No Leads*
K = Bent Leads with Kinks*
K1 = Bent Leads with Kinks*
L = Straight Leads**
Packaging
B = Bulk
T = Tape & Reel
Standard or Modified Product Indicator
STD = Standard
SA 2 - nnnn - x x x - STD
* Available in bulk packaging only.
** Bulk packaging available for straight lead devices ≤3600 V. Devices >3600 V available in tape and
reel only.
Typical Part Marking
Below 3 kV......................... SA2-xxxx
3 kV and Up................ SA2-xxxxxxxx
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.