English
Language : 

BDT60 Datasheet, PDF (2/5 Pages) Power Innovations Ltd – PNP SILICON POWER DARLINGTONS
BDT60, BDT60A, BDT60B, BDT60C
PNP SILICON POWER DARLINGTONS
electrical characteristics at 25°C case temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX
BDT60
-60
Collector-emitter
V(BR)CEO breakdown voltage
IC = -30 mA IB = 0
(see Note 3)
BDT60A
BDT60B
-80
-100
BDT60C
-120
VCE = -30 V IB = 0
BDT60
-0.5
ICEO
Collector-emitter
cut-off current
VCE = -40 V
VCE = -50 V
IB = 0
IB = 0
BDT60A
-0.5
BDT60B
-0.5
VCE = -60 V IB = 0
BDT60C
-0.5
VCB = -60 V IE = 0
BDT60
-0.2
VCB = -80 V IE = 0
BDT60A
-0.2
VCB = -100 V IE = 0
BDT60B
-0.2
ICBO
Collector cut-off
current
VCB = -120 V
VCB = -30 V
IE = 0
IE = 0
TC = 150°C
BDT60C
BDT60
-0.2
-2.0
VCB = -40 V IE = 0
TC = 150°C
BDT60A
-2.0
VCB = -50 V IE = 0
TC = 150°C
BDT60B
-2.0
VCB = -60 V IE = 0
TC = 150°C
BDT60C
-2.0
Emitter cut-off
IEBO current
VEB = -5 V IC = 0
-5
Forward current
hFE
transfer ratio
VCE = -3 V IC = -1.5 A (see Notes 3 and 4)
750
Collector-emitter
VCE(sat) saturation voltage
IB = -6 mA IC = -1.5 A (see Notes 3 and 4)
-2.5
Base-emitter
VBE(on) voltage
VCE = -3 V IC = -1.5 A (see Notes 3 and 4)
-2.5
Parallel diode
VEC forward voltage
IE = -1.5 A IB = 0
-2.0
NOTES: 3. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%.
4. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts.
UNIT
V
mA
mA
mA
V
V
V
thermal characteristics
RθJC
RθJA
PARAMETER
Junction to case thermal resistance
Junction to free air thermal resistance
MIN TYP MAX UNIT
2.5 °C/W
62.5 °C/W
resistive-load-switching characteristics at 25°C case temperature
PARAMETER
TEST CONDITIONS †
ton Turn-on time
toff
Turn-off time
IC = -2 A
VBE(off) = 5 V
IB(on) = -8 mA
RL = 20 Ω
IB(off) = 8 mA
tp = 20 µs, dc ≤ 2%
† Voltage and current values shown are nominal; exact values vary slightly with transistor parameters.
MIN TYP MAX UNIT
1
µs
4.5
µs
PRODUCT INFORMATION
2
AUGUST 1993 - REVISED SEPTEMBER 2002
Specifications are subject to change without notice.