TISP4P015L1N_10 Datasheet, PDF (1/6 Pages) Bourns Electronic Solutions – LOW CAPACITANCE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTOR

*RoHS ^COMPLIANT
TISP4P015L1N THRU TISP4P035L1N
LOW CAPACITANCE
BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTOR
TISP4P0xxL1N Overvoltage Protector Series
Designed for ADSL, ADSL2, VDSL, VDSL2 protection
Ion-Implanted Breakdown Region
- Precise and Stable Voltage
Low Voltage Overshoot Under Surge
Low Off-State Capacitance
Device Name
TISP4P015L1N
TISP4P020L1N
TISP4P025L1N
TISP4P035L1N
V_DRM
V
8
12
16
24
V_(BO)
V
15
20
25
35
Rated for International Surge Wave Shapes
Wave Shape
8/20
10/1000
Standard
IEC 61000-4-5
GR-1089-CORE
I_PPSM
A
30
18
SOT23-5 Package (Top View)
( Ti p)
1
5
NU
2
(Ring)
3
4
( Ti p)
(Ring)
Terminal typical application names
shown in parenthesis.
NU - Non-usable; no external electrical
connection should be made to this terminal.
MD-SOT23-5-001-a
Device Symbol
(Tip)
Description
This range of devices is designed to protect xDSL line-driver
interfaces from overvoltages up to rated limits. Overvoltages are
normally caused by a.c. power-system or lightning-flash distur-
(Ring)
bances which are induced or conducted onto the telephone line.
These symmetrical protectors are two-terminal thyristor-crowbar
SD-TISP4-002-a
devices. They can be used to protect between conductors, or a
pair of devices can be deployed to protect from line to ground.
When placed between the xDSL line driver IC and the transformer, this protector will clamp and switch into a low-impedance state,
safely diverting the energy transferred by the xDSL coupling transformer. The low capacitance design makes this device suitable for
designs from ADSL all the way up to 30 MHz VDSL2.
Telecom ports need protection against Common Mode (Longitudinal) and Differential (Metallic) surges, to comply with international
standards such as ITU-T K.20, K.21 or K.45, Telcordia GR-1089-CORE and YD/T. Common Mode surges are resisted by the galvanic
isolation of the coupling transformer which is commonly rated to 2 kV or greater. Differential surges can be transmitted by the
transformer, and can stress the Line Driver Interface IC. As the xDSL interface circuit is designed to operate from 3 kHz to to 30 MHz,
nearby high frequency events - such as cable flashover or primary protection activation - can generate damaging conditions for the
interface requiring this type of protection.
Please contact your Bourns representative if the protection voltage you require is not listed.
How to Order
Device
Package
Carrier
TISP4P0xxL1N
SOT23-5
Embossed Tape Reeled
Insert xx corresponding to device name.
OCTOBER 2009
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Order As
TISP4P0xxL1NR-S
Marking Code
Pxx
Reel Quantity
10000