TISP43XXMMAJBJ Datasheet, PDF (1/20 Pages) Bourns Electronic Solutions – BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

TISP4300MMAJ, TISP4350MMAJ, TISP4360MMAJ
TISP4300MMBJ, TISP4350MMBJ, TISP4360MMBJ
BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
TISP43xxMMAJ/BJ Overvoltage Protector Series
Specified for:
- ITU-T Recommendation K.21
10/700
AC Induction and Contact
- FCC Part 68 (TIA/EIA-IS-968)
Type A & B Surge
- UL 60950 and CSA 22.2 No.60950
Clause 6. Power Cross
- Telcordia GR-1089-CORE
2/10 and 10/1000
AC Induction and Contact
Applications:
TISP4300MM for:
POTS Solid-State Relay Modems
Protection Voltage .............................................................. 300 V
TISP4350MM for:
POTS Electro-mechanical Relay Modems
FCC Type B Ringer Voltage ............................................... 275 V
TISP4360MM for:
ADSL Modems
ADSL + Type B Ringer Voltage .......................................... 290 V
Ion-Implanted Breakdown Region
Precise and Stable Voltage
Device
‘4300
‘4350
‘4360
V_DRM
V
230
275
290
V_(BO)
V
300
350
360
Available in SMA and SMB Packages
SMA Saves 25 % Placement Area Over SMB
FCC Part 68 Type A Surge Compliance by
Using Either a Fuse or 7 Ω Resistor
............................................ UL Recognized Components
Description
These devices are designed to limit overvoltages on the telephone
line. Overvoltages are normally caused by a.c. power system or
lightning flash disturbances which are induced or conducted on to the
telephone line. A single device provides 2-point protection and is
typically used for the protection of 2-wire telecommunication
equipment (e.g. between the Ring and Tip wires for telephones and
modems). Combinations of devices can be used for multi-point
protection (e.g. 3-point protection between Ring, Tip and Ground).
SMA Package (Top View)
R (B) 1
SMB Package (Top View)
2 T (A)
MDXXCCE
R(B) 1
Device Symbol
2 T(A)
MDXXBGF
T
SD4XAA
R
Terminals T and R correspond to the
alternative line designators of A and B
Rated for International Surge Wave Shapes
I_TSP
Wave Shape
Standard
A
2/10 µs
GR-1089-CORE 250
10/160 µs
FCC Part 68
75
9/720 µs
FCC Part 68
65
10/700 µs
ITU-T K.20/45/ 21 65
10/560 µs
FCC Part 68
55
10/1000 µs
GR-1089-CORE
50
How To Order
Device
TISP43xxMM
Package
SMA/DO-214AC J-Bend (AJ)
SMB/DO-214AA J-Bend (BJ)
Carri er
For Standard
For Lead Free
Termination Finish Termination Finish
Order As
Order As
Embossed Tape Reeled TISP43xxMMAJR TISP43xxMMAJR-S
(R)
TISP43xxMMBJR TISP43xxMMBJR-S
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
NOVEMBER 2001 - REVISED FEBRUARY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.