TISP4350T3BJR-S Datasheet, PDF (1/1 Pages) Bourns Electronic Solutions – RJ11 Fax/Modem (FXO)

Solution Products
TISP4350T3BJR-S
B1250T
CD2320-B1600
RJ11 Fax/Modem (FXO)
Objective
In telecommunications, foreign exchange
office (FXO) designates a telephone
signaling interface that receives plain old
telephone service (POTS). This solution
protects those interfaces against surge and
power contact threats.
Compliance
ITU-T K.21, IEC 60950, UL 60950 and TIA-968A
Alternate Recommendations
The TISP4310T3 should be considered for some “B”
type ringers or for ITU-T Enhanced testing; consult
with your local Bourns representative.
Solution
1 Thyristor: TISP4350T3BJR-S
1 Telecom Fuse: B1250T
1 Diode Bridge: CD2320-B1600
Benefit
This solution provides a high level of protection
within a small amount of PCB area.
Solid-State
Hook Switch
CD2320-B1600
B1250T
Design Kit
PN-DESIGNKIT 8
Modem
RJ11
DAA
TISP4350T3BJR-S
The schematic above illustrates the application protection and does not constitute the complete
circuit design. Customers should verify actual device performance in their specific applications.
Americas: Tel [phone]
Fax [phone]
Europe: Tel [phone] Asia-Pacific: Tel [phone]
Fax [phone]
Fax [phone]
COPYRIGHT© 2011 • BOURNS, INC. • 8/10 • e/CPK1021 • “PortNote”is a registered service mark of Bourns, Inc.
“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.
Bourns® PortNote® solutions provide protection
recommendations for typical port threats.
For more information, go to:
www.bourns.com
or email: [e-mail]